Grundig CMS 4000 Руководство по эксплуатации онлайн [10/36] 895257
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Grundig CMS 4000 Руководство по эксплуатации онлайн [10/36] 895257

Grundig CMS 4000 Руководство по эксплуатации онлайн [10/36] 895257
ENGLISH
10
CONNECTION AND PREPARATION
---------------------------------------
Connecting the loudspeakers
1 Insert the wires of the loudspeaker cable into
the »SPEAKER
OUTPUT (6 �)
R L« fasteners
on the hi-fi system.
Notes:
7
Observe the left and right channels (L = left
channel, R = right channel).
7
Connect each of the red sockets (+) on the hi-fi
to the red sockets (+) on the loudspeakers.
Connecting the antenna
1 Plug the roof antenna cable into the antenna
socket »FM ANTENNA« on the hi-fi system.
Note:
7
If no roof antenna is available, use the aux-
iliary antenna supplied. When suitably posi-
tioned and with adequate signal, this antenna
provides adequate reception of FM channels.
Do not shorten the auxiliary antenna.
Connecting an MP3 player or a
USB memory stick
Caution:
7
The hi-fi system must be switched off while
the USB connection is being made. If it is not
switched off, data can be lost.
1 Connect the USB interface of the MP3 player
to the » « socket of the hi-fi system with a
standard USB cable;
or
insert the USB plug of the USB memory stick
into the USB interface » « of the hi-fi sys-
tem.
Connecting external devices
Note:
7
Switch the hi-fi system off before you connect
external devices.
1 Use standard audio cables to connect the
audio outputs of the external device to the
»
AUDIO IN
« sockets on the hi-fi system.
Connecting the headphones
1 Insert the headphone plug (3.5 mm) into the
»U« socket on the hi-fi system.
Note:
7
The loudspeakers of the hi-fi system are
switched off.
Caution:
7
Excessive volume levels when using head-
phones or earphones can damage your hear-
ing.
Connecting the power cord
Notes:
7
Check that the mains voltage on the type plate
(on the rear of the hi-fi system) corresponds to
your local mains supply. If this is not the case,
contact your specialist dealer.
7
All the other devices/loudspeakers must be
connected before you connect the power cord.
1 Plug the power cord into the wall socket.
Caution:
7
The hi-fi system is connected to the mains with
the power cord. Pull out the power plug if you
want to completely disconnect the hi-fi system
from the mains.
7
Make sure the power plug is easily accessible
during operation and not hindered by other
objects.
Activating the battery in the re-
mote control
1 Pull off the film from the battery.
Changing the remote control battery
1 Undo the battery compartment screws
2 Pull out the battery compartment
3 Insert the battery (AAA 1.5V) making sure that
the positive terminal (+) is facing upwards.
4 Push in the battery compartment.
5 Tighten the battery compartment screws.

Похожие устройства

Скачать
Случайные обсуждения

Ответы 0

Как подключить к тв
6 месяцев назад

Ответы 0

перевод на русском языке
1 месяц назад