Brayer BR1021 черный/серебристый Руководство по эксплуатации онлайн [4/23] 896676
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR1021 черный/серебристый Руководство по эксплуатации онлайн [4/23] 896676

Brayer BR1021 черный/серебристый Руководство по эксплуатации онлайн [4/23] 896676
6 7en en
• Keep the unit out of reach of children and disabled
• persons.
ELECTRIC KETTLE IS INTENDED FOR HOUSEHOLD
USE ONLY, DO NOT USE THE KETTLE FOR
INDUSTRIAL OR LABORATORY PURPOSES.
BEFORE USING THE KETTLE
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
• Unpack the kettle and remove all the packaging
materials.
• Keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• Examine the kettle for damages, in case of damage
do not plug it into the mains.
• Make sure that the specications of power supply
voltage specied on the lower panel of the unit or
the base correspond to the specications of your
mains. When using the kettle in the mains with 60
Hz frequency, the unit does not need any additional
measures.
• Wipe the outer surface of the ask (1) with a clean,
slightly damp cloth to remove dust.
ATTENTION!
To avoid burns by hot steam, do not bend over the
spout (2).
• Place the base (1) of the kettle on a solid steady
at and non-slip non-metal surface away from heat
sources as far as possible from the edge of the
surface.
• Do not place and do not use the kettle in closed
space, for example, in the cupboard or in closed
structures — this can lead to its breakage, cause
harm to the user or damage to his/her property.
• Wash the kettle ask (1) with neutral detergents,
rinse and dry. Wipe the outer surface of the ask (1)
with a slightly damp cloth and then wipe it dry. Do not
use abrasives or coarse scourers for this.
• Before connecting the kettle, make sure that there
are no moisture drops on the ask (1), the power
cord and the power plug.
• Make sure that the kettle is switched off, the ON/OFF
button (5) is set to the position «0».
• To ll the kettle with water, take it off the base (9),
press the lid (3) opening button (4).
• Fill the kettle with water up to the mark «MAX» on the
water level scale (7).
• Close the lid (3), make sure that the lid (3) is closed
tightly.
• Set the kettle lled with water on the base (9).
• Insert the power plug into the mains socket.
• To switch the kettle on, set the ON/OFF button (5) to
the position «I», the illumination (8) of the kettle ask
will light up.
• Once water starts boiling, the kettle will be switched
off automatically and the illumination (8) of the ask
will go out. Pour out water and repeat the water
boiling procedure several times.
• Hot water resulting from the rst boilings is not
recommended to consume, you may use it for
domestic needs.
USING THE ELECTRIC KETTLE
• Place the kettle on a solid steady at and non-slip
non-metal surface away from heat sources as far as
possible from the edge of the surface.
• Ensure that the ON/OFF button (5) is always
accessible and is not blocked by foreign objects.
• Make sure that the kettle is switched off, the ON/OFF
button (5) is set to the position «0».
• To ll the kettle with water, take it off the base (9),
press the lid (3) opening button (4).
• Fill the kettle with water not exceeding the maximal
ATTENTION!
Handle the electric kettle with care, the glass ask
can break when hit against a solid object or dropped.
mark «MAX» on the water level scale (7).
• Close the lid (3) and put the full kettle on the base
(9).
• Insert the power plug into the mains socket.
• To switch the kettle on, set the ON/OFF button (5) to
the position «I», the illumination (8) of the kettle ask
will light up.
• Once water starts boiling, the kettle will be switched
off automatically and the illumination (8) of the ask
will go out.
• Before removing the kettle from the base (9), make
sure that the kettle is switched off, the ON/OFF
button (5) is in the position «0».
• After switching the kettle off, wait for 15-20 seconds,
then you can switch it on again for re-boiling.
• If you need to switch the kettle off, set the power
switch (5) to the position «0».
• If you accidentally switched the kettle on, but the
water level appeared to be below the minimal mark,
the automatic thermal switch will be on and the kettle
will switch off.
• Unplug the kettle and let it cool down for 10-15
minutes, then ll the kettle with water and switch it
on, the kettle will operate in normal mode.
CLEANING AND MAINTENANCE
• Before cleaning unplug the kettle, pour out water and
let the kettle cool down.

Похожие устройства

Скачать