AENO EK3 (AEK0003) серебристый/черный Руководство по эксплуатации онлайн [8/82] 896885

not bring your hand or other body parts close to the kettle spout ❽. Hot steam

can burn the skin. Do not pour water below the "MIN" and above the "MAX"

marks on the inside of the device.

Preparing for operation

Before the first use, fill the kettle to the "MAX" mark, boil and pour the water

out.

Operating the device

Plug in the power cord ❸ located on the kettle stand ❷ (See picture c). To

open the lid ❻ press the button ❼. Pour water ❶ into the kettle but do not

exceed the "MAX" level. Turn on the switch ❹. The LED indicator on the switch

will light up. After the water in the kettle boils, the device will turn off

automatically. The LED indicator on the switch ❹ will go out. Remove the

power cord plug from the power outlet when you finish using it.

Maintenance

Remove limescale on the inside of the kettle regularly. When using the kettle

(3–5 times a day) it is recommended to descale it once a month if the water in

your area is hard or very hard. If the water is soft or medium-hard, you can

remove the scale once every 2–3 months. For descaling you can use 8 % vinegar

or citric acid solution (30 g of citric acid per 0.5 L. of water). Pour 0.5 L. of vinegar

or citric acid solution into the kettle and leave it for 2 hours without boiling.

Then pour the contents of the kettle out and boil the water in it 4–5 times

before the next use. The outer surface of the kettle can be cleaned with a dry

cloth or a cloth dampened in a weak solution of neutral detergent. After

applying the detergent, wipe the surface of the kettle with a clean, slightly

dampened cloth and then wipe it dry. The stand can only be cleaned with a dry