Arturia KeyLab Essential 61 mk3 Руководство по эксплуатации онлайн [24/44] 897077

3.10. Main Encoder knob

Selecting the main encoder brings up tabs to adjust its behavior in different states.

3.10.1. Main Knob

This tab determines what happens when you turn the main knob.

A few words about the 4 options – Absolute, Relative 1, Relative 2, and Relative 3.

In Absolute mode, the position of the encoder knob is sent to the instrument, DAW, or

hardware device. This is great if you know what setting you want to dial in.

If the Min Value and Max Value knobs are set to anything else than 0 and 127, the range sent

from the knob is limited accordingly.

In Relative mode, the encoder sends fixed values for clockwise and counterclockwise that

can be understood by certain types of devices (either hardware or software). That way,

the receiving device understands that it has to increase or decrease the corresponding

parameter.

•

Absolute:

Sends values according to the limits set under Min Value and Max Value.

•

Relative 1:

Counterclockwise = 62, clockwise = 66. Works with most devices.

•

Relative 2:

Counterclockwise = 127, clockwise = 1. Works better with certain

devices.

•

Relative 3:

Counterclockwise = 15, clockwise = 17. Some devices prefer this

method.

Output: The options are CC and Off.

MIDI Channel: Selects the MIDI channel [p.12] on which the encoder knob transmits.

CC: Selects the continuous controller message sent by the encoder.

21 Arturia - User Manual MIDI Control Center for KeyLab Essential mk3 - Editing a Template