Home
Главная
Karcher
Пароочиститель
SC 4 EasyFix Plus (1.512-640.0)
Руководство по эксплуатации Страница: 12

Karcher SC 4 EasyFix Plus (1.512-640.0) Руководство по эксплуатации онлайн [12/168] 897732

12 English

23 ** Round brush (small, yellow)

24 ** Power nozzle

25 ** Round brush (large)

26 Manual nozzle

27 Microfibre cover for manual nozzle

28 Extension tubes (2 x)

29 Unlocking button

30 Floor nozzle

31 Hook and loop fastener

32 Microfibre floor cloth (1 x)

33 ** Microfibre floor cloth (2 x)

34 ** Carpet glider

35 Descaler

** optional

Installation

Installing accessories

1. Insert and engage the steering roller and non-driven

wheels.

Illustration B

2. Push the open end of the accessory onto the steam

gun so that the unlocking button on the steam gun

engages.

Illustration I

3. Push the open end of the accessory onto the spot-

light nozzle.

Illustration J

4. Connect the extension tubes with the steam gun.

a Push the 1st Push the first extension tube onto

the steam gun so that the unlocking button on the

steam gun engages.

The connection pipe is connected.

b Push the 2nd extension tube onto the

1st extension tube.

The connection pipes are connected.

Illustration K

5. Push the accessory and / or the floor nozzle onto the

free end of the extension tube.

Illustration L

The accessory is connected.

Disconnecting accessories

1. Set the selector switch for the steam volume to the

rear.

The steam lever is locked.

2. Push the unlocking button and pull the parts apart.

Illustration P

Operation

Filling water

The water reservoir can be removed at any time for fill-

ing or be filled directly at the device.

ATTENTION

Damage to the device

Unsuitable water can block the nozzles or damage the

water level indicator.

Do not fill in pure distilled water. Use a maximum of 50%

distilled water mixed with tap water.

Do not use condensation from the clothes dryer for fill-

ing.

Do not use collected rain water for filling.

Do not use cleaning agents or other additives (e.g.

scents) for filling.

Remove the water reservoir for filling

1. Pull the water reservoir vertically upwards.

Illustration C

2. Fill the water tank vertically with tap water or a mix-

ture of tap water and no more than 50% distilled wa-

ter up to the "MAX" mark.

3. Insert the water reservoir and press downwards until

it locks into place.

Filling the water reservoir directly on the device

1. Fill tap water or a mixture of tap water and no more

than 50% distilled water from a vessel into the filling

hole of the water reservoir up to the "MAX" mark.

Illustration D

Switching on the device

Note

If there is no or too little water in the steam boiler, the

water pump starts to run and pumps water from the wa-

ter reservoir into the steam boiler. The filling process

can take several minutes.

Note

The device briefly closes the valve every 60 seconds

causing an audible soft click. Closing prevents the valve

from clogging. This does not affect the steam output.

1. Place the device on a firm surface.

2. Insert the mains plug into a socket.

Illustration E

3. Press the ON switch.

The green heating indicator light flashes.

Illustration F

4. Wait until the green heating indicator stays on.

Illustration G

5. Press the steam lever.

Illustration H

Steam leaks out.

Regulating the steam volume

The expelled steam volume is regulated using the se-

lector switch for steam volume. The selector switch has

3 positions:

1. Set the selector switch for the steam volume to re-

quired steam volume.

2. Press the steam lever.

3. Before starting cleaning, point the steam gun at a

cloth until steam is expelled evenly.

Maximum steam volume

Reduced steam volume

No steam - child lock

Note

In this position, the steam lever cannot

be operated.

Karcher SC 4 EasyFix Plus (1.512-640.0) Руководство по эксплуатации онлайн [12/168] 897732

Похожие устройства