Hotpoint HFL 560I X Руководство по эксплуатации онлайн [11/55] 901243

Hotpoint HFL 560I X Руководство по эксплуатации онлайн [11/55] 901243
11/35EN
Refrigerator / User Guide
5 Using the product
May not be available in all models
C
*Optional: The figures in this user guide are intended as drafts and may not perfectly match your
product. If your product does not comprise the relevant parts, the information pertains to other models.
5.1. Thermostat setting button
The operating temperature is regulated by the
temperature control.
W
C
5
1=Lowest cooling setting (Warmest setting).
4=Highest cooling setting (Coldest setting).
The average temperature inside the fridge should be
around +5°C.
Please choose the setting according to the desired
temperature.
Please note that there will be different temperatures in
the cooling area.
The coldest region is immediately above the vegetable
compartment.
The interior temperature also depends on ambient
temperature, the frequency with which the door is
opened and the amount of foods kept inside.
Frequently opening the door causes the interior
temperature to rise.
For this reason, it is recommended to close the door
again as soon as possible after use.
5.2. Thermostat setting button
The interior temperature of your refrigerator changes for
the following reasons;
Seasonal temperatures,
Frequent opening of the door and leaving the door
open for long periods,
Food put into the refrigerator without cooling down
to the room temperature,
The location of the refrigerator in the room (e.g.
exposing to sunlight).
You may adjust the varying interior temperature
due to such reasons by using the thermostat. Numbers
around the thermostat button indicates the cooling
degrees.
If the ambient temperature is higher than 32°C,
turn the thermostat button to maximum position.
If the ambient temperature is lower than 25°C, turn
the thermostat button to minimum position.
5.3. Defrost
Fridge compartment
Fridge compartment performs full-automatic defrosting.
Water drops and a frosting up to 7-8 mm can occur
on the inner rear wall of the fridge compartment while
your refrigerator cools down. Such formation is normal
as a result of the cooling system. The frost formation
is defrosted by performing automatic defrosting with
certain intervals thanks to the automatic defrosting
system of the rear wall. User is not required to scrape
the frost or remove the water drops.
Water resulting from the defrosting passes from the
water collection groove and flows into the evaporator
through the drain pipe and evaporates here by itself.
Deep freezer compartment does not perform automatic
defrosting in order to prevent decaying of the frozen
food.
The freezer compartment defrosts automatically.
Check regularly to see if the drain pipe is clogged or not
and clear it with the stick in the hole when necessary.

Похожие устройства

Скачать