Home
Главная
Brayer
Утюг
BR4001
Руководство по эксплуатации Страница: 6

Brayer BR4001 Руководство по эксплуатации онлайн [6/44] 543096

THE UNIT IS INTENDED FOR HOUSEHOLD USE

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL

OR LABORATORY PURPOSES.

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative

temperature, unpack it and wait for at least 3 hours

before using.

• Unpack the iron and remove any packaging materials

and advertising stickers.

• If there is a protective lm on the soleplate (11),

remove it.

• There may be water residue in the tank (10), as the

iron has undergone factory quality control.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the unit for damages, in case of damage do

not plug it into the mains.

• Make sure that specied specications of power

supply voltage of the unit correspond to the

specications of your mains. When using the unit in

the mains with 60 Hz frequency, the unit does not

need any additional settings.

• Clean the iron body and the soleplate with a soft,

slightly damp cloth and then wipe it dry.

WATER SELECTION

• Use tap water to ll the water tank (10) of the iron.

• Anti-calc function softens water in order to decrease

the mineral deposit in the steam chamber, but we

recommend to ll the tank with water additionaly

cleaned with domestic lters.

• If tap water is hard, it is recommended to mix it with

distilled water in proportion 1:1. If tap water is too

hard, mix it with distilled water in proportion 1:2 or

use distilled water only.

FILLING THE WATER TANK

ATTENTION!

Before lling the water tank (10) with water make sure

that the iron is switched o󰀨 and unplugged.

• Set the temperature control knob (12) to the position

«OFF», and the continuous steam supply knob (3) to

the position « ».

• Open the water inlet lid (2).

• Pour the water into the water tank using the beaker

(14) and then close the lid (2).

Notes:

– do not let water go over the «МАХ» mark when lling

the water tank (10);

– if you need to rell the water tank during ironing,

switch the iron o󰀨 and remove the power plug from the

mains socket.

Brayer BR4001 Руководство по эксплуатации онлайн [6/44] 543096

Похожие устройства