Home
Главная
Brayer
Электрочайник
BR1037
Руководство по эксплуатации Страница: 6

Brayer BR1037 Руководство по эксплуатации онлайн [6/44] 798586

Brayer BR1037 черный Руководство по эксплуатации онлайн [6/44] 879101

• Do not repair the unit by yourself. Do not disassemble

the unit by yourself, if any malfunction is detected, and

after it was dropped, unplug the unit and apply to the

service center.

• Transport the kettle in the original package.

• Keep the unit out of reach of children and disabled

persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL

OR LABORATORY PURPOSES.

BEFORE USING THE KETTLE

After unit transportation or storage at low temperature,

it is necessary to keep it for at least three hours at

room temperature.

• Unpack the kettle and remove all packing materials and

advertising stickers.

• Keep the original package.

• Read the safety measures and operating recommen-

dations.

• Check the delivery set.

• Examine the kettle for damages, in case of damage do

not plug it into the mains.

• Make sure that the specications of power supply

voltage specied on the lower panel of the unit or the

base correspond to the specications of your mains.

When using the kettle in the mains with 60 Hz frequency,

the unit does not need any additional settings.

• Wipe the outer and inner surface of the ask (1) with a

slightly damp cloth then wipe dry. Do not use abrasives

and coarse scourers for this purpose.

• Place the base (7) on a solid steady at and non-slip non-

metal surface away from heat sources as far as possible

from the edge of the surface.

• Do not place and do not use the kettle in closed space,

for example, in the cupboard or in closed structures —

this can lead to its breakage, cause harm to the user or

damage to his/her property.

• Wipe the outer surface of the ask (1) with a slightly

damp cloth and then wipe it dry. Do not use abrasives and

coarse scourers for this.

• Before connecting the kettle, make sure that there are no

moisture drops on the base (7), the ask (1), the power

cord and the power plug.

• Press the button (5) to open the cover (4).

• Fill the kettle with water up to the «MAX» mark, according

to the scale (9) located on the inner surface of the ask (1).

• Close the lid (4) and make sure that the lid (4) is tightly

closed.

• Place the kettle on the stand (7).

• Plug the power cord into an electrical outlet, you will hear

a sound signal, all indicators of the control buttons will

light up and the temperature of the water in the ask (1)

of the kettle will be displayed with digital symbols (14).

Note: the operation mode control buttons are touch-

sensitive, it is enough to touch the button.

• Press the button for switching on the water boiling

Brayer BR1037 Руководство по эксплуатации онлайн [6/44] 798586

Похожие устройства