Home
Главная
Brayer
Электрочайник
BR1044BK
Руководство по эксплуатации Страница: 7

Brayer BR1044BK Руководство по эксплуатации онлайн [7/44] 590859

ATTENTION!

To avoid burns by hot steam, do not bend over the

spout (2).

• Once water starts boiling, the kettle will be switched

o󰀨 automatically and the illumination (8) of the ask

will go out. Pour out water and repeat the water

boiling procedure several times.

• Hot water resulting from the rst boilings is not

recommended to consume, you may use it for

domestic needs.

USING THE ELECTRIC KETTLE

• Place the kettle on a solid steady at and non-slip

non-metal surface away from heat sources as far as

possible from the edge of the surface.

• Ensure that the ON/OFF button (5) is always

accessible and is not blocked by foreign objects.

• Make sure that the kettle is switched o󰀨, the ON/OFF

button (5) is set to the position «0».

• To ll the kettle with water, take it o󰀨 the base (9),

press the lid (3) opening button (4).

• Fill the kettle with water not exceeding the maximal

mark «MAX» on the water level scale (7).

ATTENTION!

Handle the electric kettle with care, the glass ask

can break when hit against a solid object or dropped.

• Close the lid (3) and put the full kettle on the base

(9).

• Insert the power plug into the mains socket.

• To switch the kettle on, set the ON/OFF button (5) to

the position «I», the illumination (8) of the kettle ask

will light up.

• Once water starts boiling, the kettle will be switched

o󰀨 automatically and the illumination (8) of the ask

will go out.

• Before removing the kettle from the base (9), make

sure that the kettle is switched o󰀨, the ON/OFF

button (5) is in the position «0».

• After switching the kettle o󰀨, wait for 15-20 seconds,

then you can switch it on again for re-boiling.

• If you need to switch the kettle o󰀨, set the power

switch (5) to the position «0».

• If you accidentally switched the kettle on, but the

water level appeared to be below the minimal mark,

the automatic thermal switch will be on and the kettle

will switch o󰀨.

• Unplug the kettle and let it cool down for 10-15

minutes, then ll the kettle with water and switch it

on, the kettle will operate in normal mode.

CLEANING AND MAINTENANCE

• Before cleaning unplug the kettle, pour out water and

let the kettle cool down.

• Wipe the outer surface of the ask (1) with a slightly

Brayer BR1044BK Руководство по эксплуатации онлайн [7/44] 590859

Похожие устройства