Bort SteamCare Plus Руководство по эксплуатации онлайн [8/32] 645678
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bort SteamCare Plus Руководство по эксплуатации онлайн [8/32] 645678

Bort SteamCare Plus Руководство по эксплуатации онлайн [8/32] 645678
8
ENGLISHGB
STEAM GENERATOR
GENERAL INFORMATION
Dear Customer, Please read and comply with these original
instructions prior to the initial operation of your steam gen-
erator and store them for later use or subsequent owners.
TECHNICAL SPECIFICATIONS (FIG. 1)
SteamCare
SteamCare
Plus
Power 2 200 W 2 350 W
Max
pressure
3,5 bar 4 bar
Continuous
steam
50 g/min 55 g/min
Steam temperature 98 °С
Tank capacity 1 100 ml
Heating time 60 sec
Continuous working
time
20 min
Hose leghth 1,6 m
Cable length 1,5 m
Type of sole Ceramic
Vertical
steam
+
System of protection
from scale
+
Voltage 230 V
Current frequency 50-60 Hz
Product weight 2,4 kg
PREPARING FOR USE
- Remove the water tank (5), fill water tank up to the
level marked MAX and reinstall it.
- Turn on the device using the OFF / ON mode switch
(2), check that power indicator is lighting (11)
- Set the temperature controller to the required level.
When choosing the temperature regime, follow the label
instructions on the products you are going to iron. If
label is absent, use temperature according type of fabric:
(table1)
ATTENTION: We recommend using only
distilled water!
When choosing the temperature regime, follow the
instructions on the label of the laundry you are going
to iron. If there is no label on the product, use the
temperature controller to adjust the temperature of the
sole, depending on the type of fabric of the product: (table
1)
TABLE 1
The
fabric is not
ironed
Nylon,
Acrylic,
Synthetics
Silk,
wool
Cotton,
linen
Recommended
temperature
Iron
temperature
level
Low
•
Middle
• •
High
• • •
Label
Type
of fabric
MANUAL
Steam Ironing
1. Choose necessary temperature on the iron according
type of fabric (table 1).
2. Wait «steam ready» indicator light (9) but the iron
heating indicator (10) goes off. Press the button (3)
to turn on the continuous supply of steam from the
soleplate.
3. To stop the continuous steam supply, press the
short-time steam button (12).
4. For short-term steam supply - keep pressed button
(12). To stop the steam supply, release the button (12)
and supply of steam will stop
5. If during operating water is finished, the indicator
«fill water» (8) will light on the panel. Steam supply will
stop. Fill the water tank (see “Preparing for use”)
6. At the end of ironing, select the temperature of the
iron in the “0” position. Then turn off the power and
drain water tank.
TROUBLESHOOTING
• Often, failures have simple causes and you can do the
troubleshooting yourself using the following overview. If

Похожие устройства

Скачать