Home
Главная
Vitek
Пылесосы
VT-1894 OR
Руководство по эксплуатации Страница: 10

Vitek VT-1894 OR Руководство по эксплуатации онлайн [10/28] 193904

ENGLISH

• Press the on/off button (13) to switch the vacuum

cleaner on.

• During the operation you can control the suc-

tion power using the suction power control (14)

and air flow power control (5) on the flexible hose

handle (6).

• After the unit operation switch the vacuum

cleaner off by pressing the button (13) and un-

plug the unit.

• To wind the power cord press and hold the but-

ton (18), hold the winding cord with hand to avoid

its whipping and damage.

• Between operations use the brush storage (15).

• Use the handle (10) for carrying the vacuum

cleaner or the dust bin (11).

AUTO SWITCH-OFF FUNCTION

• The vacuum cleaner is equipped with auto

switch-off function in case of motor overheating.

• In case of motor overheating, the automatic ther-

mal switch will be on, and the vacuum cleaner will

be switched off.

• In this case remove the power plug from the

mains socket immediately.

• Check the telescopic pipe and flexible hose for

obstruction and remove if any.

• Let the vacuum cleaner cool down for at least 30

minutes before switching it on again.

• Connect the unit to the mains, switch it on, if the

vacuum cleaner can not be switched on, this may

mean, that it is otherwise damaged. In this case

contact the authorized service center for repair.

CLEANING AND CARE

Remove garbage and dust from, disassemble and

clean the dust bin (11) after every usage of the

vacuum cleaner.

Start cleaning only after removing dust and garbage

from the dust bin (11).

Removing of the dust bin (11)

and removal of dust and garbage from it

• Switch the vacuum cleaner off by pressing the

on/off button (13) and unplug it. Holding the

handle (10), press the release button (12) and re-

move the dust bin (11).

• Place the dust bin over a garbage bin. Open the

lid (23) by pressing the lid lock (24). Remove

accumulated dust and garbage from the dust

bin (11).

Disassembling and cleaning of the dust bin (11)

• Switch the vacuum cleaner off and unplug it,

take the dust bin (11) off, remove dust and gar-

bage from it.

• Holding the dust bin (11) by the flask (22), turn

the lid (19) counterclockwise and take it off.

• Taking the inlet filter (20) by the ledges, turn it

counterclockwise to UNLOCK and remove it.

• Clean the inlet filter (20) from dust, to do this

remove the foam filter from the filter (20) body,

wash the filter itself and the foam filter under a

warm water jet and dry them thoroughly.

• Turn the separator (21) counterclockwise and re-

move it. Wash the separator (21) and the flask

(22) under warm water jet and dry them thor-

oughly.

ATTENTION! Before assembling the dust bin

make sure that all removable parts are clean

and dry.

Assembling of the dust bin (11)

• Insert the separator (21) with corresponding

shape flask (22). Match the ledges on the sepa-

rator (21) with the grooves of the flask (22) and

turn the separator clockwise all the way.

• Install the foam filter into the inlet filter body (20).

• Place the inlet filter (20) on the separator (21),

having matched the ledges on the filter with the

grooves on the separator, and rotate the filter

clockwise towards LOCK.

• Install the lid of the dust bin (19) matching the

ledges on the lid (19) with the grooves on the

dust bin flask (22) and turn the lid (19) clockwise

as far as it will go, the dust bin release button (12)

should be opposite the lower lid lock (24).

• Install assembled dust bin (11) to its place until

the lock (12) clicks.

Cleaning the outlet HEPA-filter

Clean the outlet HEPA-filter (17) regularly.

• Take the outlet filter grid (16) off by pressing the

lock.

• Remove the HEPA-filter (17), wash it under

a warm water jet and dry it thoroughly.

• Install the HEPA filter (17) back to its place.

• Install the grid (16) to its place.

Cleaning the protective filter (25)

If the protective filter (25) is visibly dirty, take it out,

wash it, dry it thoroughly and install it back to its

place.

Note:

– Do not wash the filters (17, 20, 25), the separa-

tor (21) and the flask (22) in a dishwashing ma-

chine.

– Before installing the filters (17, 20) make sure

that they are dry.

– Do not dry the filters (17, 20, 25) and other re-

movable parts with a hairdryer.

Vitek VT-1894 OR Руководство по эксплуатации онлайн [10/28] 193904

Похожие устройства