Scarlett SC-GS130S38 Инструкция по эксплуатации онлайн [4/12] 902371

Scarlett SC-GS130S38 Инструкция по эксплуатации онлайн [4/12] 902371
4
ENG
IM2024
WATER FILLING
Pull the tank handle and detach the water tank.
Turn the tank over and unscrew the lid.
Fill the water tank. Please observe the maximum level mark, do not overll.
Screw and tighten the tank lid.
Install the tank in place.
If the tank is empty, rst turn o the steamer, then unplug it and add water.
Place the assembled appliance on a rm and level surface. The appliance is ready for operation.
OPERATION
Connect the appliance to mains.
Hang the clothes on the hangers for steaming.
For more convenient steaming in the device provides a board to maintain things. During
steaming, it should be behind the thing you are steaming.
You can install the board in a convenient position for you: upstairs, hooking to the hanger with
special fasteners, located on the board, or vertically to the racks as well with the help of special
fasteners.
Turn the regulator.
Place the brush on the nozzle.
The appliance is ready for steaming.
STEAMING
Move the steamer attachment slowly up and down along the clothes until you reach the
desired result.
Make sure that the hose is not twisted during operation.
Touch the clothing with the attachment slightly during steaming.
Always hold the attachment in a vertical position, so that the condensate will ow back into
the steamer. If steaming is performed in a horizontal position, lift hose frequently to allow the
condensate to drain back.
WARNING! During steaming hold the attachment as far from the body as possible, to avoid
contact with hot steam coming out of the attachment holes.
For ease of steaming trousers use clothespins on the hanger.
END OF OPERATION
Turn the regulator to OFF position.
Unplug the appliance from mains. Let the appliance cool down for 30 minutes.
Place the attachment on the attachment holder.
Drain water from the tank completely.
Retract the telescopic stand and move the appliance in a convenient place for storage.
DESCALING
The scale settles on the main parts and assemblies of the steamer over a period of time. To
remove scale from the steamer, it is recommended to carry out the cleaning (descaling)
procedure monthly.
For cleaning, prepare the following solution: vinegar (50%) and water (50%). It is sucient to
prepare two cups of this solution.
Slowly pour the solution into the tank.
Perform one operating cycle with this solution. Then rinse the tank with running water.
CLEANING AND MAINTENANCE
The use of distilled or demineralised water will reduce the frequency of cleaning. However, you
can use the tap water.
Switch the device o and unplug it.
Disassemble the hose and the telescopic stand, and set them aside separately.
Drain the water from the reservoir for this unscrew the cap to remove the water from the tank.
The remaining water must be removed by unscrewing the plug at the bottom of the device.
ATTENTION! Before draining the water you must wait until the device has cooled (about 30
minutes), in order to avoid burns when draining hot water.
Wash the base unit.
Скачать