Home
Главная
Scarlett
Утюг
SC-SI30K67
Инструкция по эксплуатации Страница: 4

Scarlett SC-SI30K67 Инструкция по эксплуатации онлайн [4/12] 902375

ENG

IM2024

••• Cotton, Linen

Maximum temperature (Steam)

• Insert the mains plug into the wall socket. The indicator light will turn on.

• When the indicator light goes out you may start ironing

• If you set the temperature control to lower setting after ironing at a high temperature, it is not

recommended to iron before the pilot light switches on again.

WATER TANK FILLING

• Unplug the iron before lling the water tank.

• Hold the steam iron in horizontal position.

• Slowly pour water through the water inlet.

• Do not ll higher than mark on the water tank, in order to avoid water spilling.

NOTE: Your steam iron is designed to use tap water. However, if the water is very hard, it is advisable

to use distilled water.

• The opening which is used for pouring water should be closed when the iron is in use.

• Always unplug the iron from the power socket when relling the water reservoir.

• Do not use chemically de-limed or perfumed water.

• If you have too hard water,it is advisable to use only distilled or demineralized water.

• When re-lling the tank with water, always disconnect the iron from the mains

• In the end, it is always necessary to completely remove the water from the reservoir and/ or set the

variable steam control mode to

avoid water leakage from holes.

NOTE: After draining water from the cooled iron, set it upright (on the heel) and turn on for 2 minutes

at maximum heat, then remove the iron from the mains.

SPRAYING

• As long as there is enough water in the water tank, you may use the spray button at any temperature

setting during steam or dry ironing.

• Press the spray button several times to activate the pump while you are ironing.

STEAM IRONING

• With the unit unplugged, ll the steam iron with water.

• Stand the steam iron on its heel rest in an upright position on an iron-safe surface and plug in.

• Set the temperature control dial to the “••“ or “•••” position.

• When the indicator light is o, the steam iron has reached desired temperature.

• Set the steam regulator to the

position.

• When nished, turn the temperature dial counterclockwise to the minimum position and unplug the

appliance from the power supply.

CAUTION: Avoid coming in contact with ejected steam.

DRY IRONING

• The steam iron can be used on the dry setting with or without water in the water tank, however it is

best to avoid having the water tank full while dry ironing.

• Turn the variable steam control to the minimum position.

CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not rell

it with water until the steam iron cools down.

BURST OF STEAM

• The burst of steam feature provides additional steam for removing stubborn wrinkles.

• Set the steam regulator to maximum steam

, set the maximum temperature on the controller,

wait a moment and click the steam blow.

NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button pressed

for more than 5 seconds.

NOTE: For the best steam quality, do not use more than three successive bursts each time, because

the iron will cool.

VERTICAL STEAM

• Ensure that there is enough water in the water tank.

• Stand the steam iron on its heel rest on an iron-safe surface and plug it.

• Set the temperature control dial and variable steam control to their maximum positions.

• Hold the iron vertically and press the steam burst button, an intense steam will be ejected from the

soleplate.

WHEN YOU FINISHED IRONING

• Set the temperature dial to the minimum position.

• Remove the mains plug from the wall socket.

Scarlett SC-SI30K67 Инструкция по эксплуатации онлайн [4/12] 902375

Похожие устройства