Home
Главная
Scarlett
Пылесос
SC-VC80C66
Инструкция по эксплуатации Страница: 4

Scarlett SC-VC80C66 Инструкция по эксплуатации онлайн [4/8] 902378

IM024

www.scarlett.ru SC-VC80C66

 Be careful when cleaning on stairs.

 Before you start using the vacuum cleaner, please remove all large or sharp objects from the floor in order to prevent

damage of the unit.

 CAUTION: To avoid voltage overload do not plug the unit and other powerful electrical appliances to the power supply

at the same time.

 Never use the vacuum cleaner without filters.

 Do not use the appliance on wet surfaces. This unit does not absorb water.

 If you have cleaned the carpet with liquid detergent, let the carpet dry up completely before vacuuming it.

 Never use the appliance without dust bin. Replace the dust bin without delay if it is damaged.

 Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest

service center.

 If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at

least 2 hours before turning it on.

 The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless

such changes influence significantly the product safety, performance, and functions.

 Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following

format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of

production.

PREPARATION

 The device is designed for cleaning dust in the room.

 Unpack the device and remove the sticker from the body.

 In order to connect the hose to the vacuum cleaner insert hose base into sucking inlet and press gently until it clicks.

In order to disconnect the hose press two locks located at hose base sides.

 Pull out the retractable tube until the necessary length is reached. For this purpose move the retractable tube length

adjuster and pull out the tube end.

 Insert the hose into the tube.

 Attach one of the nozzles to the tube:

 The "Floor/cfrpet" combined nozzle is designed for carpet mats and similar floor coatings, and for flat surfaces;

 The "Furniture/slot" nozzle is designed for cleaning upholstered furniture, curtains and decorative surfaces and

such as corners or narrow slots.

INSTRUCTION FOR USE

 "Cyclone" system ensures maximum power during cleaning.

 Before starting, unwind the cord to sufficient length and insert the plug into the power supply. The yellow mark on the

cord shows optimal cord length. Do not unwind the cord beyond the red mark.

 Press On/Off button to switch the unit on and press again to stop it.

 You can adjust the air flow using the air flow regulator on the flexible hose handle:

 Decrease flow for cleaning curtains, books, furniture, etc. Increase flow for cleaning bare floor.

 To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing

damage.

 To prevent motor overheating do not work continuously longer than 30 minutes and obligatory stop the vacuum

cleaner for no less than 15 min.

 WARNING!

 Be sure to clean the container after each cleaning.

 Never use the vacuum cleaner without installed filter and with damaged or dirty filter. Otherwise, dust will fall into the

motor and cause damage to the vacuum cleaner.

 Don’t use the vacuum cleaner if the container is filled to the mark “MAX”. When the container is filled, dirty air clogs up

the vacuum cleaner filter and the engine can overheat and disable.

 Don’t use the vacuum cleaner for cleaning of material debris such as cement, whitewash, plaster, metal shavings and

etc. These particles cause to the engine damage.

 Don’t wash vacuum cleaner parts in a dishwasher or a construction machine.

CARE AND CLEANING

 Switch off the appliance and pull the plug from the power supply.

 Clean the appliance outside surface with soft cloth using mild non-abrasive detergent.

 Vacuum cleaner or cord should never be immersed into water or any liquids.

 We recommend making the filtration system clean up after every using.

 For removing dust tank press dust tank release button.

 To open the dust tank bottom and clean dust and garbage need to press the button for opening the bottom of the dust

tank.

FILTERS CLEANING

 Clean filter at least once a year. In case if the vacuum cleaner is used frequently, clean the filters after each 3 to 5

cleaning operations.

 Press the dust container lock button and disconnect the container from the cleaner housing.

 Unscrew the container lid in a counterclockwise direction.

 Remove the dust collection capsule.

 Remove the filter cover and remove the filter by turning it counterclockwise.

 Clean the filter sponge and filter cover.

 Reinstall all parts in reverse order.

 Remove the air vent on the back of the vacuum cleaner by pulling on the ledge.

 Clean the filters.

 Replace the filters after cleaning.

CAUTION:

 Never use the appliance without filters.

Scarlett SC-VC80C66 Инструкция по эксплуатации онлайн [4/8] 902378

Похожие устройства