AENO EG5 (AEG0005) Инструкция по эксплуатации онлайн [11/182] 902873

aeno.com/documents 11

cooking time and temperature. At the end of the countdown, an acoustic

signal sounds 5 times. The display will show: «DONE».

If you do not intend to use the appliance again, switch it off with the

«Start/Cancel» button and unplug it from the power socket.

Color indication of the grill modes

 blue – device is running in «Preheat» mode;

 green – the appliance is operating in the «Preheat» mode;

 yellow – device is working in «Food preparation» mode;

 red – operation in «Food preparation» mode has been completed.

Care and cleaning

Wait for the appliance to cool down, then carefully remove the grease drip

tray (8) and remove its contents. Remove the removable plates. Wash the drip

tray and the removable plates with a neutral detergent and dry them

thoroughly before putting them back in. Repeat the procedure after each

cooking operation. The tray and removable plates can be washed in a

dishwasher. Do not use metal brushes or abrasive cleaning products. Clean the

body of the appliance with a damp cloth and a little detergent. Then wipe the

surface with a dry cloth.

Troubleshooting possible problems

1. The grill does not switch on. Possible causes: The power socket is defective,

or the plug is not fully inserted into the socket. Remedy: Make sure there is

power in the socket (e.g., by plugging in another functioning appliance) and

that the grill plug is fully inserted into the socket.

2. The grill is switched on, but the removable plates are not heated. Possible

reason: The appliance has not been set in the operating mode. Remedy:

Make sure that the operating time and temperature are set on the display

and that the «Start/Cancel» button is pressed.

Device error codes displayed on the display

 E1 – contact breakage of the upper thermostat;