KRAFT KF-CI2230 Инструкция по эксплуатации онлайн [15/36] 903179

УТЮГ

IRON

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE

• When moving, servicing or repairing, the iron must be disconnected from the power

supply. To disconnect, hold on to the plug, do not pull or pull the power cord.

• Do not use the appliance with a damaged power cord or outlet. Do not twist, bend or

increase the power cord. Do not place heavy objects on it. Make sure that the cord

does not touch sharp edges and heated surfaces.

• Do not use the iron outdoors, as well as in rooms with high humidity and at ambient

temperatures below 0°C. Do not expose it to rain, moisture, direct sunlight and other

atmospheric phenomena. Do not install the device on a wet surface, as well as in

places of smoke and dust formation.

• Use a separate outlet to connect the iron. Using the same outlet for several appliances

can lead to a fire. To avoid overloading the network, do not use other high-power

devices in the same circuit.

• Make sure that the plug of the power cord is not damaged or deformed. A faulty plug

can overheat and cause a fire. Do not use adapters, extension cords or “tees” to

connect the device. If you smell a burning wiring, disconnect the power supply on the

switchboard, remove the plug of the device from the outlet and contact the service

center.

• Install the iron away from heat sources and heating devices, beware of ignition

sources.

DEVICE DESCRIPTION

OPERATION

Make sure that the device parameters (see “Technical Specifications”) correspond to

the network parameters

• Fully unwind the power cord.

• Connect the device to a power source.

• By turning the thermostat knob, set the desired temperature mode corresponding to

the ironing mode indicated in the instructions or on the fabric label.

• It is not recommended to start the ironing process if the thermostat is set to a low

1. Spray Nozzle

2. Water Filling Cover

3. Steam Selector

4. Burst of Steam Button

5. Spray Button

6. Soft Grip

7. Power Indicating Light

8. Soleplate

9. Thermostat Knob

10. Self-Cleaning Button

* The images and drawings in this manual

are for informational purposes only. The

purchased product may differ from the one

shown in the images/diagrams.