KRAFT KF-HD229ADR Инструкция по эксплуатации онлайн [14/32] 903190

HAIR DRYER

USER GUIDE

• Do not close the air inlet and outlet openings during operation of the device, this may

cause the device to overheat.

• Never let go of a working hair dryer. This can lead to personal injury and damage to

the device and surrounding objects. Do not allow foreign objects, dust, u, hair and

animal hair to get inside the device.

• If the device overheats, it turns o automatically. Allow the appliance to cool down for

a few minutes, and then turn it on again.

• Allow the appliance to cool completely before storing it.

RISK OF ELECTRIC SHOCK

• The hair dryer must be connected to the 220-240 V / 50-60 Hz power supply through a

grounded outlet with a current of at least 10A. Incorrect grounding or a deviation of the

voltage parameters by more than 10% can lead to unstable operation of the device or

electric shock.

• Insert the plug of the power cord into the socket only aer installing the device. Make

sure that there is free access to the plug.

• Do not touch the plug of the power supply cable with wet hands. Wipe the plug dry,

clean it from dust and carefully insert it into the socket. Dust, water, or weak contact

can cause a re or electric shock.

• When moving, servicing or repairing, the hair dryer must be disconnected from the

power supply. To disconnect, hold on to the plug, do not pull or pull the power cord.

• Do not use the appliance with a damaged power cord or outlet. Do not twist, bend or

increase the power cord. Do not place heavy objects on it. Make sure that the cord does

not touch sharp edges and heated surfaces.

• Do not use the hair dryer outdoors, as well as in rooms with high humidity and at

ambient temperatures below 0°C. Do not expose it to rain, moisture, direct sunlight

and other atmospheric phenomena. Do not install the device on a wet surface, as well

as in places of smoke and dust formation.

• Use a separate outlet to connect the hair dryer. Using the same outlet for several

appliances can lead to a re. To avoid overloading the network, do not use other high-

power devices in the same circuit.

• Make sure that the plug of the power cord is not damaged or deformed. A faulty plug can

overheat and cause a re. Do not use adapters, extension cords or “tees” to connect the

device. If you smell a burning wiring, disconnect the power supply on the switchboard,

remove the plug of the device from the outlet and contact the service center.

• Install the hair dryer away from heat sources and heating devices, beware of ignition

sources.