Texas SP 46 Инструкция по эксплуатации онлайн [22/40] 10841

Pump the primer (A) according to the scheme

below :

Pull the handle (B), which loosens the knife brake,

towards the handle and pull the starting cord.

Let the starting cord carefully return to the engine.

Pull the handle (C) up to activate the self-propelling

function.

The handle (B) must be pulled towards the steering

handle while using the machine. When the handle is

released, the engine (and the knife) stops in 5 seconds.

Oil change

The oil must be changed after the first 5 hours of use. After that the oil must be changed at

least once a year.

1. Let the engine run for 5 minutes to warm up the oil. This makes it run easier and

make the oil change more complete.

2. Turn off the engine after 5 minutes. Take off the spark plug cap. Unscrew the

cork for the drain plug. Theo oil now runs out of the engine. Keep a suitable

container ready to collect the oil.

NOTE that the engine may only be tilted backward at an angle of max 45

degrees.

Refit the drain plug and pour fresh oil into the engine.

3. This is done by removing the oil stick and filling with correct amount of oil.

4. Mount the spark plug cap.

Alternatively use a oil drainage kit:

1. Suck the oil up through the oil filler hole using the

syringe. (See the section Identification of parts, Pos

C.) Use the hose as an extension piece to reach the

bottom of the engine. Transfer the used oil to the

accompanying container.

2. Fill the engine with new oil, type SAE30.

Check the oil level using the dipstick on the oil bung

Remember to dispose of the used oil so that it is not harmful to nature.

Use your local recycling station.

Temperature Push

> 0° C

2-3

> 0° - 10° C

1-2

> 10° - 20° C

0-1

> 20° C