Home
Главная
Brayer
Блендер
BR1209
Инструкция по эксплуатации Страница: 8

Brayer BR1209 Инструкция по эксплуатации онлайн [8/28] 904072

• During the operation or between the operation cycles,

you can add the required ingredients into the jar (3).

Remove the measuring cup (1) from the lid (2) and use

it as a measuring container. Reinstall the measuring

cup (1) after adding ingredients through the opening in

the lid (2).

• After nishing, set the control knob (7) to the «0»

position and unplug the power cord from the electrical

outlet.

• Remove the blender jar (3) from the motor unit (6) by

turning it counterclockwise (g. 5).

• Remove the lid (2) (g. 6) and extract the processed

ingredients from the jar (3).

Pulse mode

• To activate the pulse mode, turn the control knob (7)

counterclockwise to the «Р» position and hold it down.

• After nishing in pulse mode, set the control knob (7)

to the «0» position and unplug the power cord from the

electrical outlet.

Note: if food processing is hindered, you can add some

water, liquor or juice etc. into the blender bowl (3).

ICE CRUSHING

• Put no more than 10 ice cubes with an approximate

size of 30x25x25 mm into the bowl (3).

• Switch on the pulse mode for a few seconds by turning

the knob (7) counterclockwise to position «P» and

holding it down, set the knob (7) to position «0». If

necessary, activate the pulse mode again to obtain the

desired consistency of crushed ice.

• After you nish using the unit, set the knob (7) to the

position «0», and disconnect the power plug from the

mains socket.

CLEANING AND MAINTENANCE

• Wash the bowl (3) preliminary, to do this pour

some water into the bowl (3) and add some neutral

detergent.

• Cover the bowl (3) with the lid (2) with installed

measuring cup (1).

• Insert the power plug into the mains socket.

• Turn on the pulse mode, to do this turn the knob (9)

counterclockwise to the «Р» position and hold it, the

light (8) will illuminate, set the knob (9) to the «0»

position after a few seconds of blender operation.

• When you have nished rinsing the bowl (3), unplug

the power cord from the mains socket.

• Remove the lid (2) from the bowl (3).

• Remove the jar (3) from the motor unit (6) by turning

it counterclockwise (g. 5), pour out the cleaning

solution, rinse the jar (3), and dry it.

• Wash the measuring cup (1), lid (2), and the gasket

of the lid (2) with warm water and a neutral detergent,

rinse, and dry them.

• Wipe the motor unit (6) with a soft damp cloth, then

dry it thoroughly.

• Do not use abrasive cleaners or solvents for cleaning

the motor unit (6) and removable parts.

• Do not immerse the motor unit (6), power cord, or

plug into any liquids. Do not place any removable

parts in the dishwasher.

Brayer BR1209 Инструкция по эксплуатации онлайн [8/28] 904072

Похожие устройства