Home
Главная
Brayer
Термопот
BR6002
Инструкция по эксплуатации Страница: 8

Brayer BR6002 Инструкция по эксплуатации онлайн [8/44] 904101

• Unpack the thermopot and remove all the packaging

materials.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the thermopot for damages, in case of

damage do not plug it into the mains.

• Make sure that the specications of power supply

voltage specied on the label correspond to the

specications of your mains. When using the

thermopot in the mains with 60 Hz frequency, the unit

does not need any additional measures.

• Wipe the outer surface of the unit body with a clean,

slightly damp cloth to remove dust.

• Remove the lid (5).

• Remove the water tank (6).

• Wipe the water tank (6) inner surface with a clean,

slightly damp cloth to remove dust. Close the lid (5).

CONTROL PANEL

Before using the thermopot, familiarize yourself

with the functions of the buttons on the control

panel (4).

• «10» Indicator of the need for descaling «Descaling»,

after using the thermopot for 10 hours, the indicator

(10) «

» will ash, this means that it is necessary

to clean o󰀨 mineral deposits (scale) (see section

Removing mineral deposits).

• «11» Indicator of lack of water in the tank «Lack of

water», if the tank (6) runs out of water, a ashing

error code E 7 and a ashing indicator (11) «

» will

be displayed, add water to the tank (6) and continue

using the thermopot.

• «12» The water supply button for brewing co󰀨ee or

tea «

», when you press the button (12) « »,

the temperature of 92 °C will be displayed with digital

symbols (20), you can select the required volume of

water supply: 000 (continuous ow of water), 100 ml,

200 ml, 300 ml, 400 ml, by pressing the button (14) «

». After setting the desired water supply volume,

press the on/o󰀨/water supply button (13) «

», after

5-10 seconds the water will ow out of the spout (3),

if you need to turn o󰀨 the water supply, press the

button (13) «

» again.

• «13» On/o󰀨/water supply button «

», to turn on the

water supply, press the button (13) «

», after 5-10

seconds the water will ow out of the spout (3), if you

need to turn o󰀨 the water supply, press the button

(13) «

» again.

• «14» Water supply volume selection button «

»,

by pressing the button (14) «

», set the required

water supply volume: 100 ml, 200 ml, 300 ml, 400 ml,

000 (continuous water supply), the set water supply

volume is displayed with digital symbols (19).

• «15» The descaling mode button « », after using

the thermopot for 10 hours, the indicator (10)

«Descaling» will ash, this means that removing

Brayer BR6002 Инструкция по эксплуатации онлайн [8/44] 904101

Похожие устройства