Home
Главная
Brayer
Отпариватель
BR4129
Инструкция по эксплуатации Страница: 8

Brayer BR4129 Инструкция по эксплуатации онлайн [8/32] 904124

ATTENTION! Do not plug the steamer into the mains

if the water tank (1) is empty.

• Place the steamer on the base (9) on the at and

stable surface.

• Insert the plug of the power cord (8) into the mains

socket, the indicator (5) will light up, wait for some

time (from 3 to 5 minutes) necessary for normal

steam generation.

• Take the steamer in your hand and hold it by the

handle (7) at the level of the steam supply button (3).

• To switch on the continuous steam supply, press the

button (3) and slide it down until it stops (Fig. 2).

• To switch o󰀨 the continuous steam supply, press the

button (3) and slide it upwards.

• Before the main use of the steamer, clean the steam

chamber by directing the released steam onto the

fabric, for example, try to smooth out a kitchen towel.

• If the tank (1) runs out of water during operation,

switch the steamer o󰀨 before lling the tank (1) with

water, to do this, unplug the power cord (8) from the

mains socket.

• After nishing work, unplug the power cord (8) from

the mains socket and let the steamer cool down.

Notes:

- when you switch it on for the rst time, an

extraneous smell may appear, this is normal;

- after 8 minutes, when operating in the steam

supply mode, the steamer will be automatically

switched o󰀨, while the indicator (5) will ash, to

switch the steamer on again, press the steam

supply button (3) again and wait for the operating

surface (4) to heat up.

USING THE BRUSH ATTACHMENT

ATTENTION! Before installing the brush (10), make

sure that the plug of the power cord (8) is not

inserted into the mains socket.

• Install the brush attachment (10) on the steamer.

• Open the water inlet lid (2). Fill the tank (1) with

water, not exceeding the MAX mark, and tightly close

the water inlet lid (2) (Fig. 1).

• Do not pour carbonated water, perfumed additives,

vinegar, chemicals, etc. into the tank (1).

• Place the steamer on the base (9) on the at and

stable surface.

• Insert the plug of the power cord (8) into the mains

socket, the indicator (5) will light up, wait for some

time (from 3 to 5 minutes) necessary for normal

steam generation.

• Take the steamer in your hand and hold it by the

handle (7) at the level of the steam supply button (3).

• Hang the clothes on a hanger.

Note: do not steam clothing while it is being worn, as

the temperature of the released steam is high, use only

hangers.

• To switch on the continuous steam supply, press the

button (3) and slide it down until it stops (Fig. 2).

Brayer BR4129 Инструкция по эксплуатации онлайн [8/32] 904124

Похожие устройства