Home
Главная
Brayer
Паровая Станция
BR4157
Инструкция по эксплуатации Страница: 9

Brayer BR4157 Инструкция по эксплуатации онлайн [9/38] 904128

• Take the handle (11), press the iron unlock button (6)

and remove the iron from the steam station body.

• During the operation hold the iron by the handle (11).

• Select the required steam generation mode by

pressing the button (13 or 15), it will be shown on the

display (16) with glowing indicators (17, 18).

• To save energy and water you can set the e󰀩cient

steam supply mode, which is indicated with the

symbol (18) on the display (16).

• Before starting work, you need to release some

steam, because condensate may accumulate in the

steam pipe (9), to do this, press the steam supply

button (12) «», directing the steam, for example, onto

a kitchen towel, drops of water and steam will come

out of the holes of the iron soleplate (14).

• For short-time steam supply press the button (12), for

continuous steam supply press and hold the button

(12). For continuous steam supply, press the button

(12) and move the lock. To switch the continuous

steam supply o󰀨, press the button (12) and move the

lock in the opposite direction.

Notes:

- the iron has an anti-drip valve that shuts o󰀨

the water supply when the iron soleplate (14)

temperature is low, this prevents water from

leaking out of the iron soleplate (14) holes;

- when the unit is switched on for the rst time a

foreign smell can appear - it is normal and is not

covered by warranty;

- each time you press the steam supply button

(12), the pump is switched on, its operation is

accompanied by a characteristic sound;

- when the water in the tank (2) runs out, the

indicator (21) «

» will light up, switch the device

o󰀨 by pressing the on/o󰀨/mode selection button

(15) «

», remove the power plug from the mains

socket;

- take the handle (3), press the lock (4) and remove

the tank (2) from the steam station body, open

the water inlet lid (5), pour water into the tank

(2), close the lid (5), install the tank (2) back to its

place, switch the device on and continue working;

- during operation, the steam pressure may

change slightly, since with prolonged vaporization

the water temperature in the steam chamber

decreases by several degrees, if you take a short

break in operation, then the steam pressure will

automatically recover;

- make sure that the steam pipe (9) doesn’t bend

and twist during the operation.

• During breaks and after operation place the iron

on the steam station body in the iron installation

place (8). To x the iron, press the lock button (7), to

continue using the iron, press the unlock button (6)

and remove the iron from the steam station body.

Note: during breaks you can put the iron on its base on

a stable surface (10).

• After operation, place the iron in its installation

place (8) on the steam station body, switch the

Brayer BR4157 Инструкция по эксплуатации онлайн [9/38] 904128

Похожие устройства