Home
Главная
Brayer
Отпариватель
BR4127
Инструкция по эксплуатации Страница: 8

Brayer BR4127 Инструкция по эксплуатации онлайн [8/44] 904130

ATTENTION! Before detaching the water tank (1),

make sure that the power plug (7) is not inserted

into the mains socket.

• Press the buttons (6) and remove the water tank (1)

(pic. 1).

• Open the water inlet lid (2). Fill the water tank (1) with

water non exceeding the MAX mark and close the

water inlet lid (2) tightly.

• Do not ll the tank (1) with carbonated water,

perfume additives, vinegar, chemical agents, etc.

• Install the water tank (1) back to its place and make

sure that the tank (1) is xed properly.

ATTENTION! Do not plug the garment steamer in if

the water tank (1) is empty.

• Place the steamer on a solid, at, and steady

surface.

• Insert the power cord plug (7) into an electrical outlet,

press the power on/o󰀨 button (10) to turn on the

steamer, the indicator (9) will light up, wait for some

time (15 to 20 seconds) for normal steam generation.

• Hold the steamer in your hand by the handle (5) at

the level of the steam release button (3).

• Press and hold the button (3) to activate the steam

release (g. 2).

• Release the button (3) to turn o󰀨 the steam release.

Note: when activating the steam release, the pump

turns on, which may produce slight vibration and noise

- this is normal. The pump may operate louder if the

water in the tank (1) is low, check the amount of water

and rell if necessary.

• Before the main use of the steamer, clean the steam

chamber by directing the steam onto the fabric, for

example, try to smooth out a kitchen towel.

• If the water tank (1) is empty, before removing and

relling the tank (1) with water, turn o󰀨 the steamer

by pressing the power on/o󰀨 button (10), unplug the

power cord plug (7) from the electrical outlet.

• After nishing operation, turn o󰀨 the steamer, unplug

the power cord plug (7) from the electrical outlet, and

allow the steamer to cool down.

Note: upon initial use, there may be a slight odor, which

is a normal occurrence and not covered under warranty.

USING THE BRUSH ATTACHMENT

ATTENTION!

Before installing the brush attachment (11) and

removing the tank (1), make sure that the power

plug (7) is not inserted into the mains socket.

• Attach the fabric brush (11) to the steamer (g. 3).

• Press the button (6) and remove the water tank (1)

(g. 1).

• Open the water inlet lid (2).

• Fill the tank (1) with water, not exceeding the MAX

mark, and securely close the lling hole cover (2).

• Do not pour carbonated water, perfumed additives,

vinegar, chemicals, and such into the tank (1).

• Place the water tank (1) back in place, ensuring it is

securely xed.

Brayer BR4127 Инструкция по эксплуатации онлайн [8/44] 904130

Похожие устройства