Home
Главная
Brayer
Вентилятор
BR4982
Инструкция по эксплуатации Страница: 8

Brayer BR4982 Инструкция по эксплуатации онлайн [8/32] 904132

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative

temperature, unpack it and wait for at least 3 hours

before using it.

• Unpack the unit and remove all the packaging

materials.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the unit for damages, in case of damage do

not plug it into the mains.

• Make sure that specied specications of power

supply voltage of the unit correspond to the

specications of your mains. No additional settings

required when using the device in the mains with 60

Hz frequency.

• Wipe the fan body with a slightly damp cloth and then

wipe it dry.

FAN ASSEMBLY

• Fan is supplied with its Base (1) disassembled. Do

not turn on the fan without the Base (1).

• Align the protrusions on the bottom part of the fan

body with the openings on the base (1) (Fig. 2).

• Secure the base, using the provided set of fasteners

(Fig. 3).

• Make sure the base (1) is securely fastened.

REMOTE CONTROL

ATTENTION! A lithium battery is used in the remote

control. To avoid danger, do not allow children to play

with the battery. If your child has swallowed a battery,

immediately see a doctor.

Battery installation/replacing

• Press on the clamp and remove the battery holder

(27) from the remote control (26) body, insert a

CR2025 battery (are not included) into the holder,

strictly following the polarity.

• Install the battery holder (27) into the remote control

(26).

Notes:

- if there is an isolation insert in the battery holder

(27), remove the insert;

- replace the battery in time;

- do not recharge the lithium battery CR2025;

- remove the battery if you are not planning to use

the unit for a long time;

- remove the used battery from the remote control

(26) and dispose of it.

• When using the remote control, aim it at the front

upper part of the fan body (7).

• The distance between the remote control and the fan

should not exceed 5 m, the coverage angle should

be up to 30 degrees.

Brayer BR4982 Инструкция по эксплуатации онлайн [8/32] 904132

Похожие устройства