Home
Главная
Stingray
Настольные плиты
ST-HP3526A
Инструкция по эксплуатации Страница: 8

Stingray ST-HP3526A Инструкция по эксплуатации онлайн [8/12] 904813

• Do not use the device with a broken or damaged power cord. Contact a qualified specialist for inspection or repair, or contact the manufacturer.

• Unplug the device from the wall outlet before cleaning or maintenance.

• Allow the device to cool completely before cleaning.

• Use only a mild detergent to remove dirt.

• Do not immerse the device under running water to avoid malfunctions.

• Before cooking, make sure that the ceramic dishes are clean, otherwise it may be difficult to wash off dirt and soot, and the dishes may discolor.

• Do not use abrasive or aggressive cleaning agents for the device, as they can damage the stove as a result of a chemical reaction.

• Do not use gasoline, thinner, hard cleaning brush or polishing powder to clean the cooker to avoid damaging the exterior finish.

• Persons with pacemakers should be at least 60 cm away from the working stove.

• Failure to follow these recommendations may result in electric shock or death.

• The device is not intended for use by people with physical and mental disabilities who have no experience with this device. In such cases, the user must be previously instructed by the person responsible

for his safety.

CLEANING AND MAINTENANCE

• Unplug the appliance from the power supply before cleaning.

• Let the unit cool down completely.

• Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.

ERROR MESSAGES

During operation the following error messages can be displayed:

Errors

Check whether plug is swtiched on.

Check whether the electricity is cut off.

Warning Signal E0

Check whether the suitable pot is used.

Check whether the pot is put on the cooking plate

Warning Signal E1

Check whether the IGBT probe break off.

Warning Signal E2

Check whether the IGBT temperature reach very high.

Warning Signal E3

Check whether the voltage too high.>280V

Warning Signal E4

Check whether the voltage too low. <85V

Warning Signal E5

Check whether the main temperature sensor break off.

Warning Signal E6

Check whether the cooker dry burning.

Warning Signal E9

Check whether the errors on circuit.

SPECIFICATION

Power supply

220-240 V ~ 50/60Hz

Producer: COSMOS FAR VIEW INTERNATIONAL LIMITED-ROOM 701, 16

APT, LANE 165, RAINBOW NORTH STREET, NINGBO, CHINA

Made in China

WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.) Production date is available in the serial number located on the identification sticker on the gift box

and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production. Producer may change the

complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device. Current information about service centers is

available on the website https://stingray.ru/

Stingray ST-HP3526A Инструкция по эксплуатации онлайн [8/12] 904813

Похожие устройства