Home
Главная
Stingray
Увлажнитель Воздуха
ST-HF501B
Инструкция по эксплуатации Страница: 7

Stingray ST-HF501B Инструкция по эксплуатации онлайн [7/10] 904862

ST-HF501B

• To reduce the risk of electric shock or fire, do not immerse the appliance cabinet, power cord or plug in water or other liquids. If this happens, immediately disconnect the device from the power supply

and, before using it further, have the operation and safety of the device checked by qualified personnel.

• When using the device by children, direct adult supervision is required.

• Do not use the device with a damaged power cord or connector. To reduce the risk of electric shock or fire, do not attempt to disassemble or repair the product yourself. To repair and adjust the device,

contact your nearest service center.

• The device is designed to maintain a comfortable level of humidity in residential premises and offices. Not recommended for use in production areas with high levels of dust. Do not use the device

outdoors.

• Make sure that the power cord does not cross sharp corners or touch hot surfaces.

• Before plugging in the appliance, fill the water tank with water. Otherwise the device may be damaged.

• Do not place the device near furniture or electrical appliances.

• The humidifier should be placed on a hard, level surface.

• The steam spray should not be aimed directly at furniture or electronic equipment as moisture may damage them.

• Use only clean water to fill the water tank! The water temperature should not exceed 40ºС! Do not add aromatic substances or oils to the water!

• If the ambient temperature drops below 0˚C, the water tank and water channel should be drained to prevent it from freezing.

• Never operate the appliance with an empty water tank.

USING THE APPLIANCE

You can set the machine by touching icons on the base.

Place the appliance on the flat and firm surface.

• Do not operate the unit without water.

• To fill the tank, remove the water tank cover and pour water into the water tank, do not pour water from the middle hole. Wait a few minutes before

starting the appliance.

• Fill with distilled water and be sure to properly reinstall the water tank cover. Make sure the water tank cover has the silicon ring on it to ensure no

leakage.

• Put back the water tank and nozzle at correct position before switching on the machine.

• You can put essential oil into the aroma hole as need. 2-3 drops of oil are usually adequate depending on quality of oil and desired amount of aroma.

ATTENTION:

Do not add aroma oil directly to the water tank.

• Plug in appliance, touch the

icon on the base to set the machine ON/OFF and mist output level (strong-medium-low).

NOTE: The 1st touch is switching on the machine and mist output is strong. The 2nd touch is setting mist output level to medium. The 3rd touch is setting the mist output level to low. The 4th touch is

swtiching off the machine.

• Press the

icon on the base to set the night light ON/OFF .

• Press the

icon on the base to set the humidity, from 45% to 90%.

NOTE: When the appliance is on, it shows the current humidity level. When the room reaches the humidity % you set, the machine will stop working automatically. When the humidity % decreases and

become less than the present humidity %, the machine will start working again. If you don’t set the humidity, the machine will keep working until the water is not enough.

• Press the

icon on the base to set the timer - 1h, 2h, 4h.

Stingray ST-HF501B Инструкция по эксплуатации онлайн [7/10] 904862

Похожие устройства