Home
Главная
Stingray
Увлажнитель Воздуха
ST-HF503B
Инструкция по эксплуатации Страница: 7

Stingray ST-HF503B Инструкция по эксплуатации онлайн [7/10] 904866

ST-HF503B

• The humidifier should be placed on a hard, level surface.

• The steam spray should not be aimed directly at furniture or electronic equipment as moisture may damage them.

• Use only clean water to fill the water tank! The water temperature should not exceed 40ºС! Do not add aromatic substances or oils to the water!

• If the ambient temperature drops below 0˚C, the water tank and water channel should be drained to prevent it from freezing.

• Never operate the appliance with an empty water tank.

USING THE APPLIANCE

You can set the machine by touching icons on the base or by the remote control. If remote control fails to work, make sure a battery is installed and plastic is removed to active the battery.

Place the appliance on the flat and firm surface.

• Do not operate the unit without water.

• To fill the tank, remove the water tank top cover and pour water into the water tank, do not pour water from the middle hole inside the water tank. Put back the water tank top cover after adding water.

Wait a few minutes before starting the machine.

• Plug in appliance, touch the

icon on the base or on remote control to set the machine ON/OFF.

• Press the

icon on the base or remote сontrol to set the mist output level.

NOTE: the 1st pressing is strong. The 2nd pressing is medium. The 3rd pressing is weak.

• Press the

icon on the base or remote control to set the UVC light ON/OFF.

• Press the

icon on the base or remote control to set the humidity, from 45% to 90%.

NOTE: when the appliance is on, it shows the current humidity level. When the room reaches the humidity % you set,

the machine will stop working automatically. When the humidity % decreases and become less than the present humidity %,

the machine will start working again. If you don’t set the humidity, the machine will keep working until the water is not enough.

• Press the

icon on the base or remote control to set the display ON/OFF.

• Press the

icon on the remote control to set the timer, 1h, 2h,......, 8h, 9h as need.

• If there is no enough water in the water tank, the machine will beep and the display will show twinkle indication. The machine will stop working after a few seconds. Uplug the machine and refill the water

tank as instruction.

NOTE: If moisture collects around the appliance, this is not a defect. It may be an indication that the room humidity is too high. Set the mist weaker or switch off the appliance.

WARNING: If the appliance is not used for a long period of time, drain the remaining water from the water tank.

CLEANING AND MAINTENANCE

To minimize limescale formation:

• Use boiled or distilled water.

• Clean the water tank weekly.

• If there is limescale in the water tank, the appliance must be cleaned immediately.

• Change the water in the tank regularly.

• Clean the entire appliance periodically. Make sure that all parts of the appliance are completely dry when not in use.

Stingray ST-HF503B Инструкция по эксплуатации онлайн [7/10] 904866

Похожие устройства