Stingray ST-HF504A Инструкция по эксплуатации онлайн [6/9] 904868

Stingray ST-HF504A Инструкция по эксплуатации онлайн [6/9] 904868
ST-HF504A
6
GBR USER MANUAL
CAUTION
Please read these instructions carefully before using the device to avoid damage during use and keep it for future reference.
Before turning on for the first time, check whether the technical characteristics of the product indicated on the label correspond to the parameters of the electrical network.
Incorrect handling may result in product failure, material damage and harm to the user's health.
Always unplug the appliance from the mains when not in use.
Disconnect the device from the power supply when removing or installing removable parts, as well as before cleaning.
Never turn on or unplug the device with wet hands to avoid electric shock.
Do not touch water or internal parts of the appliance with your hands when it is plugged in.
Do not move the device during operation.
To reduce the risk of electric shock or fire, do not immerse the appliance cabinet, power cord or plug in water or other liquids. If this happens, immediately disconnect the device from the power supply
and, before using it further, have the operation and safety of the device checked by qualified personnel.
When using the device by children, direct adult supervision is required.
Do not use the device with a damaged power cord or connector. To reduce the risk of electric shock or fire, do not attempt to disassemble or repair the product yourself. To repair and adjust the device,
contact your nearest service center.
The device is designed to maintain a comfortable level of humidity in residential premises and offices. Not recommended for use in production areas with high levels of dust. Do not use the device
outdoors.
Make sure that the power cord does not cross sharp corners or touch hot surfaces.
Before plugging in the appliance, fill the water tank with water. Otherwise the device may be damaged.
Do not place the device near furniture or electrical appliances.
The humidifier should be placed on a hard, level surface.
The steam spray should not be aimed directly at furniture or electronic equipment as moisture may damage them.
Use only clean water to fill the water tank! The water temperature should not exceed 40ºС! Do not add aromatic substances or oils to the water!
If the ambient temperature drops below 0˚C, the water tank and water channel should be drained to prevent it from freezing.
Never operate the appliance with an empty water tank.
USING THE APPLIANCE
You can set the mist output by the switch control knob.
Place the appliance on the flat and firm surface.
Do not operate the unit without water.
To fill the tank, remove the water tank top cover and pour water into the water tank, do not pour water from the middle hole inside the water tank. Put back
the water tank top cover after adding water.
Wait a few minutes before starting the machine.
When set the mist function, the indicator light will be on.
Plug in the appliance, switch the control knob to set the mist output. The mist will start coming out after some seconds.
If there is not enough water in the water tank, the indicator will show red light, the appliance will stop working. Unplug the appliance and refill the water tank.
NOTE: The front control knob controls ON/OFF, mist output, UV light and indicator light.
Скачать