Home
Главная
Stingray
Увлажнитель Воздуха
ST-HF509A
Инструкция по эксплуатации Страница: 6

Stingray ST-HF509A Инструкция по эксплуатации онлайн [6/9] 904870

ST-HF509A

• Never turn on or unplug the device with wet hands to avoid electric shock.

• Do not touch water or internal parts of the appliance with your hands when it is plugged in.

• Do not move the device during operation.

• To reduce the risk of electric shock or fire, do not immerse the appliance cabinet, power cord or plug in water or other liquids. If this happens, immediately disconnect the device from the power supply

and, before using it further, have the operation and safety of the device checked by qualified personnel.

• When using the device by children, direct adult supervision is required.

• Do not use the device with a damaged power cord or connector. To reduce the risk of electric shock or fire, do not attempt to disassemble or repair the product yourself. To repair and adjust the device,

contact your nearest service center.

• The device is designed to maintain a comfortable level of humidity in residential premises and offices. Not recommended for use in production areas with high levels of dust. Do not use the device

outdoors.

• Make sure that the power cord does not cross sharp corners or touch hot surfaces.

• Before plugging in the appliance, fill the water tank with water. Otherwise the device may be damaged.

• Do not place the device near furniture or electrical appliances.

• The humidifier should be placed on a hard, level surface.

• The steam spray should not be aimed directly at furniture or electronic equipment as moisture may damage them.

• Use only clean water to fill the water tank! The water temperature should not exceed 40ºС!

• If the ambient temperature drops below 0˚C, the water tank and water channel should be drained to prevent it from freezing.

• Never operate the appliance with an empty water tank.

USING THE APPLIANCE

• Place the appliance on a flat and firm surface.

• Do not operate the unit without water.

• To fill the tank, remove the nozzle from the water tank, and then add water into the water tank, do not pour water from the water tank hole at the water tank.

Put back the nozzle after adding water. Wait a few minutes before starting the machine.

NOTE: no need to take away the water tank top cover when adding water.

• Plug in the appliance, switch the control knob to set the mist output. The mist will start coming out after a few seconds.

• If there is not enough water in the water tank, the indicator will show red light, the appliance will stop working. Unplug the appliance and refill the water tank.

NOTE: The front control knob controls ON/OFF, mist output, indicator light and night light.

NOTE: It is normal to hear dripping sound when the mist output is at high level.

WARNING: If the appliance is not used for a long period of time, drain the remaining water from the water tank.

CLEANING AND MAINTENANCE

To minimize limescale formation:

• Use boiled or distilled water.

• Clean the water tank weekly.

• If there is limescale in the water tank, the appliance must be cleaned immediately.

• Change the water in the tank regularly.

• Clean the entire appliance periodically. Make sure that all parts of the appliance are completely dry when not in use.

Stingray ST-HF509A Инструкция по эксплуатации онлайн [6/9] 904870

Похожие устройства