Stingray ST-FH1070A Инструкция по эксплуатации онлайн [7/11] 904975
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Stingray ST-FH1070A Инструкция по эксплуатации онлайн [7/11] 904975

Stingray ST-FH1070A Инструкция по эксплуатации онлайн [7/11] 904975
7
USAGE
• In order to avoid damage of the device, nothing should interfere the operation of air outlet. Provide free space of at least 1 m on each side.
• Before connecting the device to the power supply, set the thermostat control to the extreme (minimum) position.
• Connect the plug to the power supply.
• Set the mode control to one of the three modes indicated below (the indicator light will light up):
- "Fan mode/Room temperature air" (room temperature air circulation without heating).
- "Warm air" mode (the device heats the air at medium power).
- "Hot air" mode (the device heats the air at maximum power).
• Turn the thermostat control to the extreme (maximum) position.
• The heating temperature is adjusted in two ways:
1) by rotating the thermostat knob: clockwise – to increase the temperature, counterclockwise – to decrease the temperature.
2) by setting various operating modes by the mode control.
• DO NOT USE THE DEVICE FOR MORE THAN 4 HOURS WITHOUT INTERRUPTION.
• To turn the device off, set the mode control to the position ‘’О’’, turn the thermostat control to the extreme (minimum) position, then disconnect the device from the power supply.
SAFETY SYSTEM
The heater is fitted with a safety device which will switch off the heater in case of accidental overheating (e.g. obstruction of air intake and outlet grills, motor turning slowly or not at all). To reset, disconnect
the plug from the power for a few minutes, remove the cause of overheating then plug the appliance in again.
The appliance is fitted with a tip-over switch. When you use the appliance in an upright position on a flat and stable surface, the tip-over switch will be on. In the event the heater is knocked over, the heater
will stop functioning automatically.
CLEANING AND MAINTENANCE
• Switch off the appliance and unplug it from the power supply and allow cooling down. Wipe the outside of the appliance with a soft damp cloth. Clean the air inlet/outlet grilles regularly.
• Do not immerse the appliance in water or other liquids. Do not use any detergents or abrasives and do not allow any water to enter the heater.
• When the heater is not used for long periods of time it should be protected from dust and stored in a clean dry place.
SPECIFICATION
Power supply
Producer:
COSMOS FAR VIEW INTERNATIONAL LIMITED
Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China
Made in China
230 V ~ 50 Hz
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model
without notice. Please check when purchasing device. Current information about service centers is available on the website https://stingray.ru/

Похожие устройства

Скачать