Home
Главная
Stingray
Тепловентилятор
ST-FH1065A
Инструкция по эксплуатации Страница: 7

Stingray ST-FH1065A Инструкция по эксплуатации онлайн [7/11] 904980

BEFORE THE FIRST USE

• Unpack the appliance and remove all packaging materials and labels. Store warning labels (if available) and the product serial number plate on the housing!

• Clean the device with a damp cloth, clean the accessories in soapy water rinse thoroughly and dry.

USING THE APPLIANCE

• In order to avoid damage to the appliance, nothing should interfere with air outlets. There should be free space of at least 1 m on each side of the heater.

• Place the unit on a flat surface. Plug in the appliance.

• Press the ON/OFF button ( ) to turn the unit on.

• Press the mode control button ( ) and select one of the three operating modes below:

1) "Fan/ Room Temperature Air" mode (circulating room temperature air without heating);

2) “Warm Air” mode (the appliance heats air at medium power);

3) "Hot Air" mode (the appliance heats the air at maximum power).

• To set the required heating temperature, press the temperature adjustment buttons ( and ) and select the desired temperature from 15 to 35℃. When the selected temperature is reached, the

heater will automatically turn off. When the room temperature drops, the unit will automatically start.

• To turn the heater off, press the ON/OFF button ( ), the heater will stop within 30 seconds. Then unplug the heater.

OSCILLATION

• To increase the heating area, press the ON/OFF oscillation button ( ). The fan heater will start 80° rotation.

• To turn this mode off, press the button ( ) again.

TIMER

• To set a specific heating time, press the off time programming button ( ) and select the desired time from 1 to 12 hours.

• When the set time ends, the heater will automatically stop.

SAFETY SYSTEM

To avoid damage of internal components, the heater is equipped with a safety system which will automatically switch off the appliance in case of accidental falling or overheating.

If overheating occurs:

• Turn the mode control switch to « » position and remove the plug from the socket.

• Let the fan heater cool down for a few minutes before you start it again.

• Remove the cause of overheating.

• Plug in the appliance and switch it on. If the appliance doesn’t operate normally, remove the plug from the socket immediately and contact the nearest customer service center

CLEANING AND MAINTENANCE

• Switch off the appliance and unplug it from the power supply and allow cooling down. Wipe the outside of the appliance with a soft damp cloth. Clean the air inlet/outlet grilles regularly.

• Do not immerse the appliance in water or other liquids. Do not use any detergents or abrasives and do not allow any water to enter the heater.

• When the heater is not used for long periods of time it should be protected from dust and stored in a clean dry place.

SPECIFICATION

Power supply

Producer:

COSMOS FAR VIEW INTERNATIONAL LIMITED

Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China

Made in China

230 V ~ 50 Hz

Stingray ST-FH1065A Инструкция по эксплуатации онлайн [7/11] 904980

Похожие устройства