Home
Главная
Stingray
Охладитель воздуха
ST-CO4600A
Инструкция по эксплуатации Страница: 5

Stingray ST-CO4600A Инструкция по эксплуатации онлайн [5/7] 905018

• Do not block air inlets on the motor block.

• This fan includes a Li-Ion battery. NEVER remove the battery for charging. ONLY use the hardware provided to recharge the fan.

• Before disposing of this product, the Li-Ion battery must be removed.

• The appliance must be disconnected from the power supply before removing the battery.

• The Li-Ion battery must be disposed of safely. Contact your local council for details for safe disposal

• Do not use the fan without protective grilles.

USING THE DEVICE

CHARGING YOUR FAN

The fan can be charged using the USB cable provided.

1. Place the fan on a flat surface

2. Ensure the speed control is at OFF position

3. Connect the interface (on the rear of fan) by using the USB cable supplied.

Ensure the cable is fully unwound.

4. Disconnect the USB cable from the interface once charged. During charging, the charging light will be in red color,

5. once battery fully charged, the charging light will be in green color

Fully charge the Built-in lithium battery before use. A full charge will take approx. 4-5 hours

Fan Speed Control

After charging, press the SPEED button to select desired fan speed ( Low-Medium-High-Off in turn)

-If you pressed the‘’SPEED’’ button one time, the fan will work at low fan speed;

-If you pressed the ‘’SPEED’’ button two times, the fan will work at medium fan speed;

-If you pressed the‘’SPEED’’button three times, the fan will work at high fan speed;

-if you pressed the ‘’SPEED’’ button after high fan speed, the fan will switch off.

Mist volume Control

Open the water tank cover and add the water or ice water (Don’t add more than 200mL water).

Cover the tank tightly after adding water to avoid running out.

Note: when there is water in the water tank, please keept the appliance horizontally to prevent the water leakage.

Press MIST button

Press the‘’MIST’’ button to select desired mist sprayed volume (Low-Medium-High-Off in turn)

Mist function can be used separately, or together with the fan.

-If you pressed the‘’MIST’’ button one time, the mist sprayed will be in low volume;

-If you pressed the ‘’MIST’’ button two times, the mist sprayed will be in medium volume;

-If you pressed the‘’MIST’’button three times, the mist sprayed will be in high volume;

-if you pressed the ‘’MIST’’ button after high volume, the mist sprayed will switch off.

Note: Please make sure that there is water in the water tank when you press “Mist” button. When there is no water in the water tank, please pay attention to add the water or stop the MIST function in time,

otherwise the unit will be damaged.

Light Mode

The fan supports 3 colour modes, press the “LIGHT” button, the lighting mode will be turn on. Press the button again, to switch off the light.

Adjust the airflow direction

Swing the louver up and down to adjust the airflow direction.

Stingray ST-CO4600A Инструкция по эксплуатации онлайн [5/7] 905018

Похожие устройства