GLOBBER ONE NL205 DELUXE Эксплуатационная инструкция онлайн [4/37] 911550
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

GLOBBER ONE NL205 DELUXE Эксплуатационная инструкция онлайн [4/37] 911550

GLOBBER ONE NL205 Эксплуатационная инструкция онлайн [4/37] 911549
6
ENGLISH
Keep the instructions for future.
NF-EN-14619: 2019
READ THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER BEFORE USING.
MAXIMUM WEIGHT: 100 KG
Warnings
- The Scooter is suitable for adolescents and adults. It is not a toy, but sports equipment for physical
training, it is not intended for use in extreme sports such as jumping, ollie ramps, etc. This product
should never be used at a skate park for an “aggressive” use (challenging skateboarding moves,
etc.).
-Usewithcautiononaflat,clean,drysurfaceand,ifpossible,awayfromotherusers,andobey
the road safety rules.
-Checklocallawsregardingscooteruse,respectallthetrafficrulesandsigns.Stayawayfrom
other pedestrians or users on public roads.
-Bestwhenusedonaflat,drysurfacefreeofgravelandgrease.Avoidbumpsanddrainagegrates
that might cause an accident.
- Warning! Protective equipment consisting of wrist protectors, gloves, knee pads, helmets and
elbow pads should be worn.
Using the scooter
• Before and after each use:Topreventpinchedfingers,carefullyfollowtheinstructionsof
unfolding and folding. Make sure that the locking mechanisms are securely locked:
- Check the height of the steering system and make sure that the nuts are tightened and the
handlebars and front wheel are perpendicular.
- Check all of the connection elements: the brake, the quick release system of the steering column
and the wheel axles must be correctly adjusted and must not be damaged.
- Also check the tire wear.
• Braking:
- A brake is located at the rear, when necessary, press down on it to slow down. Press down
gradually to prevent skidding or loss of stability. The metal brake may heat up after multiple uses.
Avoid touching it during and after use.
- If model with the handlebar brake: a right brake handle to slow the back wheel. When using, keep
riding the scooter with both hands.
Assembling the product
- The folding and unfolding operations of the scooter are to be done by a single person.
-Duringtheseoperations,becarefulyoudonotgetyourfingersstuckinthehingeand
locking system.
- Make sure that the locking devices are properly engaged.
1 - Unfold the scooter
D1: Unpack the folded-up scooter from its box.
D2: Hold the scooter, one hand is holding the handle and the other hand pulls away the eyelet
trigger until the lock clicks open. Unfold the handle and front wheel upwards until the automatic lock
secures the T-bar handle in upright position.
D3: Open the clamp lever on the T-bar. Pull out both parts of the T-bar handle from the double clips.
Press in the spring loaded buttons and insert both into the tubes of the T-bar. Wiggle and turn a bit
untiltheirspringloadedlockingbuttonsalignwiththeholesandfixthewholesteeringbarassembly
in place. Close clamp lever.
Warning! Risk of injury by pinching!
Do not insert your fingers into the shaded area indicated
2 - Adjust the handle bar
D4:Openthefixinglug.Thenpressdownthespringloadedlockingbuttonandpullthehandlebar
up or push it down with the other hand.
Choose the suitable locking hole and make sure the spring loaded locking pin snaps securely in
place. The adjustable T-bar handle can be adapted in height to suit the rider.
Three different positions are available.
Lockthefixinglugtightandsecurelywhenyouhavefinishedadjustingtheheight.
Self-standing mode
D5: Pull the eyelet trigger slightly up to release the lock and fold back the T-bar just a tad.
Release the eyelet trigger when the deck touches the ground. The scooter is now in self-standing
mode. You can now leave the scooter standing in that position. You can park your scooter upright
onanyflatsurface.
3 - Fold up the scooter
D6: Pull the eyelet trigger up to unlock the T-bar handle and pull back the T-bar handle a bit. Fold
back the T-bar handle until it locks on the back brake plate. The locking mechanism and the eyelet
trigger lock together with an audible click.
D7: You can grip the scooter by the T-bar handle and pull it behind you for easy transport.
For purposes of storage, remove both parts of the T-bar handle from the T-bar.
Press down the spring-loaded locking pins while pulling out the part sideways at the same time.
Strings inside the tubes will hold the individual part together. Clip the two parts of the T-bar handle
into the clips to both sides of the steering bar (refer to D3 in reverse order).
During use:
- Standing on the scooter, with one hand on each handle, push with one of your feet to move
forward. Proceed with caution at the start.
- Shoes are mandatory and we strongly recommend wearing pants and long sleeve shirts to avoid
injury if you fall.
- The scooter does not include any headlights or lights. It is therefore not suitable for use at night or
during periods when visibility is limited.
- Use the bell for ringing when alerting others of your approach. Move the lever to make a sound.
DO NOT FORGET TO REGULARLY TIGHTEN THE DIRECTION BLOCKS TO AVOID
MISALIGNMENT OR LOSS OF THE SCREW.
Care / Maintenance: regular maintenance is a safety commitment;
- Wheel bearings: avoid going through water, oil or sand as this can damage wheel bearings. To
look after the wheel bearings, systematically check that the wheels turn properly by turning the
scooter upside-down and using your hand to spin the wheels. If the wheels do not spin they must
be removed to check their condition. First unscrew the wheel axle, remove the axle and detach
the wheel, then carefully push the two wheel bearings out of their housing. If they are chipped or
dented, new ones should be bought. If there is no visible damage, they must then be oiled. To do
this, remove all traces of grease, mud or dust with a kitchen towel or cloth, and re-oil them with a
greasesprayorbyleavingthemtosoakovernightinoil[turnthemseveraltimesintheoilfirst].
Then reassemble the wheel bearings and axles, followed by the wheel, onto the scooter. Proceed
in the same manner for the other wheel.
- Wheels: the wheels wear down with time and can be pierced if overly used on rough surfaces.
The back wheel on which the brake is applied is particularly affected after several hours of braking.
In the interests of safety, they should be checked regularly and changed if necessary.
- Modifications:theoriginalproductmustbynomeansbemodifiedexceptforthemaintenance-
related changes mentioned in these instructions.
- Nuts, axles and other self-locking fixings: these should also be checked regularly. They can
become loose after a while in which case they should be tightened. They can become worn and
not tighten properly, in which case they should be replaced.
- Reflective printing:Cleanthereflectiveprintingwithaclean,lint-freecloth.Eventually,usea
glass cleaner.
DELUXE & ULTIMATE models
Therearereflectivestripesonthesteeringcolumntomakethescootervisibleat
nightbyreflectingoncominglightwhenparkedorbeingridden.
DELUXE & ULTIMATE models possess a bell located on the side of the T-bar
handle opposite to the hand brake.
DELUXE & ULTIMATE models possess a hand brake located on the T-bar handle.
Pull back the brake lever slowly using your hand in a measured manner towards
you to slow down and/or stop.
- Barrel adjustment:
Fine tune the brake blocks by turning the barrel screw. To do so:
First undo the barrel-adjuster’s locknut (turn counter clockwise).
To move both brake blocks inward, unscrew the barrel in counter clockwise direction in small
increments.
To move both brake blocks outward, turn the barrel inward in clockwise direction in small
increments.
Checkthefeelingofthebrakefromtimetotimetogetthefineadjustmentright.
Tighten the barrel-adjuster’s locknut when done (turn clockwise).
Technical Specifications
MODEL NO.
ONE NL125 (475) /
ONE NL125 DELUXE
(476)
ONE NL205-180
DUO (474)
ONE NL205 (477) /
ONE NL205 DELUXE
(478)
ONE NL230
ULTIMATE (479)
AGE 8+ scooter Adult scooter
User height
1.20 - 1.90 m
(3’9’’ - 6’2’’)
1.55 - 2.0 m
(5’1’’ - 6’6’’)
1.55 - 2.0 m
(5’1’’ - 6’6’’)
1.55 - 2.0 m
(5’1’’ - 6’6’’)
T-bar height
89 - 99 cm
(35.04’’ - 38.98’’)
101 - 111 cm
(39.76’’ - 43.70’’)
101 - 111 cm
(39.76’’ - 43.70’’)
107- 117cm
(42.13’’ - 46.06’’)
Gross weight
3.9 kgs
4.2 kgs (DELUXE)
5 kgs
5.3 kgs
5.6 kgs (DELUXE)
6 kgs
Additional Info
For questions and inquiries please contact us at: contact@globber.com
WARRANTY
The manufacturer warranties this product to be free of manufacturing defects for period of 2 years
from date of purchase. This limited Warranty does not cover normal wear and tear, tire, tube or
cables, or any damage, failure or loss caused by improper assembly, maintenance, or storage.
This Limited Warranty will be void if the product is ever
• used in a manner other than for recreation or transportation;
•modifiedinanyway;
• rented
The manufacturer is not liable for incidental or consequential loss or damage due directly or
indirectly to the use of this product.
Globber does not offer an extended warranty. If you have purchased an extended warranty, it must
be honoured by the store at which it was purchased.
For your records, save your original sales receipt with this manual and write the product name
below.
………………………………………………………………………..
Spare parts
To order spare parts for this product, please visit our website: www.globber.com
7
ENGLISH

Похожие устройства

Скачать
Заметки