Tesy CN 202 ZF Инструкция по эксплуатации онлайн [4/32] 114941

Tesy CN 202 ZF Инструкция по эксплуатации онлайн [4/32] 114941
4 Usage and Storage Instructions
EN
There is power & turbo knob. There are 5 selections.
II+
is 2000W and Turbo working.
I+ is 800W and Turbo working.
0 – is no power and turbo working.
II - is only 2000W.
I – is only 800W.
The appliance is equipped with thermo-regulator
sensitive to ambient temperature. You can turn
the thermo-regulator knob until the desired room
temperature is achieved (the size of the heated
room has to conform to the power of the appliance;
in case the desired room temperature can not
be achieved, an additional panel heater needs to
be operated). You can turn the thermostat knob
clockwise to maximum power and when the desired
room temperature is achieved you have to turn it
counter-clockwise slowly until you hear a “ticking”
sound. Then the appliance will maintain the air
temperature in the room at the adjusted level by
switching on and o automatically.
The appliance has got an in-built anti-frost function.
In case you decide to use the appliance in a room,
where minimum temperature is to be maintained
(winter gardens, cellars or attics), the appliance
has to be adjusted to the desired heating level
(level I, level II or both), the thermostat knob has
to be turned counter -clockwise until it reaches
the smallest indicator circle . In this position the
appliance will maintain room temperature in the
range of 5±2
о
С, i.e. it will periodically switch on and
o, maintaining the adjusted level of temperature
comfort in the room.
The available power levels are presented
indicatively. It is compulsory for the appliance to
be secured when positioned in a room without
supervision. The appliance electric installation has
to be equipped with an automatic safety fuse; with
a distance between its contacts in disconnected
state of at least 3 mm.
Thermostat knob
Heater switch
CLEANING
It is compulsory rst to switch o the appliance and
disconnect its power cord from the socket. Before
starting cleaning the panel heater you should wait
until it cools down after disconnecting it from the
power socket.
Clean the body of the appliance with a damp cloth,
vacuum cleaner or soft brush.
Never immerse the appliance into water – there is
danger to your life from electric shock!
Never use petrol, thinner or coarse abrasive
products for cleaning because they will damage the
surface coating of the appliance.
STORAGE
Before putting away the panel heater let it cool
down after disconnecting it from the power socket.
Use the original packing for storing the panel heater
if it will not be used for a certain period of time. The
product can be protected from excessive dust and
dirt when it is kept in its original packing.
Never put a hot appliance into its packing!
The product has to be stored at a dry place away
from direct sunlight.
It is explicitly forbidden to store the appliance in
wet or damp premises.
PRODUCT PACKING SET INCLUDES:
Panel heater 1 pc.
Feet 2 pcs.
Feet fixing screws 2 pcs.
Manual 1 pc.
Guarantee certificate 1 pc.
TECHNICAL CHARACTERISTICS OF THE
APPLIANCE:
Model Rated power Rated voltage Rated
frequency
CN202ZF 2000W 230V~ 50Hz
Warning: in order to avoid overheating,
do not cover the appliance!
Environment protection instructions
Old electric appliances contain valuable materials
and therefore should not be disposed of as domestic
waste! We ask you for your active cooperation to
protect the resources and the environment by
submitting your appliance to organized buy-back
stations (if there are such).

Содержание

Скачать