Sea-Doo RXT iS 2009 Инструкция по эксплуатации онлайн [72/555] 12044
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Sea-Doo RXT iS 2009 Инструкция по эксплуатации онлайн [72/555] 12044

Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [72/555] 12053
Section 02 ENGINE
Subsection 04 (SUPERCHARGER)
529035950
3
F00B2GA
1
2
1. Support plate
2. Bearing support/pusher
3. Protrusi
on here
NOTICE
Before pressing in the supercharger
shaft, be sure to properly support the inner
race of ball bearing in supercharger housing
half with the recommended tool. This way,
the installation pressure will be applied to the
inner race and will not be transmitted to the
bearing balls which would otherwise shorten
the bearing life.
10. Apply heat outside of the housing with a heat
gun to expand its diameter prior to inserting
the shaft. Ensure there is no O-ring on the
housing half prior to heating.
11. Apply engine oil on supercharger shaft. Press
shaft with thrust washer and distance sleeve
together in supercharger housing half.
smr2006-012-032_a
1. Compressor shaft
2. Ball bearing
3. Supercharger housing half
4. Thrust washer
5. Distance sleeve
1
F00B2HA
2
1. Supercharger shaft
2. Distance sleeve
12. Apply engine oil on seal and push into retaining
disc by hand.
NOTE: Always use a NEW oil seal when assem-
bling the supercharger.
1
R1503motr242A
1. Oil seal
smr2009-020 49

Похожие устройства

Скачать
Случайные обсуждения

Ответы 1

какой ресурс у турбины
9 лет назад