Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [22/555] 12053

INTRODUCTION

Threadlocker Application for Case-In

Components (Metallic Gaskets)

A00A3VA

1. Proper str

ength Loctite

1. Clean inner housing diameter and outer gasket

diameter.

2. Spray hou

sing and gasket with

LOCTITE PRIMER

N (P/N 293

800 041)

3. Apply a strip of proper strength Loctite on lead-

ing edge of outer metallic gasket diameter.

NOTE: Any Loctite product can be used here. A

low strength liquid is recommended as normal

strength and gap are required.

4. Install

according to standard procedure.

5. Wipe off surplus.

6. Allow it to cure for 30 minutes.

NOTE: N

ormally used on worn-out housings to

preven

t leaking or sliding.

It is generally not necessary to remove gasket

compound applied on outer gasket diameter.

smr2009-011 XIX