Hyundai H-CDM 8055 Инструкция по эксплуатации онлайн [15/56] 120086

RDS mode ON/OFF

Press 7/AF button to switch on or off the RDS mode. Whenever RDS is switch on, “RDS” will flash on the display.

PTY function

Press 9/PTY button to enter PTY Select mode; the program name will be displayed on the display. You can use UP/DOWN cursor

buttons to select the items and press LEFT/RIGHT cursor buttons to begin searching the corresponding program.

RDS menu

Press and hold 9/PTY button to enter the RDS Menu; in the menu, press UP/DOWN cursor buttons to select the items and press

LEFT/RIGHT cursor buttons to adjust corresponding item. After choosing, please leave the unit idle to activate.

TA SEEK/TA ALARM

In TA SEEK mode the unit will seek for traffic announcement program when TA is pressed; in TA ALARM mode the alarm is set off.

MASK DPI/MASK ALL

During MASK DPI mode, the unit will mask only the AF which has different PI, this is the default mode; during MASK ALL mode,

the unit will mask the AF which has different PI and no RDS signal with high field strength.

RETUNE SHORT/LONG

“RETUNE” refers to the time period the unit allows for radio scan when reception is interrupted. SHORT represents a time period of

30 seconds; LONG represents a time period of 90 seconds.

REGION: OFF/ON

In Region ON mode, AF switching or PI SEEK is implemented to the station which have all PI codes are the same as current station.

In Region OFF mode, the regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented.

TA-VOLUME:

The default TA volume value is 18; you can adjust it from 0 to 40.

TA (Traffic Announcement) function

Press and hold 8/EQ/TA button to switch TA mode on or off. When TA mode is on and a traffic announcement is transmitted, if the

unit was in CD or AUX IN mode, it will switch to Radio mode. If the volume level was under the threshold point, it will be raised to

the threshold point. But if the user changed the volume level, which was more than the threshold point (min. TA volume level), it will

be set to the last level. When TA mode is on, TA of individual segment is turned on. When a TP station is received, TP of individual

segment is turned on. The current traffic announcement is cancelled by pressing 8/EQ/TA button. But the TA mode will not be off.