Candy HOLIDAY 182 Инструкция по эксплуатации онлайн [18/27] 125880

Candy HOLIDAY 182 Инструкция по эксплуатации онлайн [18/27] 125880
34
Fix the sheet of corrugated material on the bottom as shown
in picture.
Connect the fill hose to the tap.
The appliance must be connected to the water mains using
new hose-sets. The old hose-sets should not be reused.
IMPORTANT:
DO NOT TURN THE TAP ON AT THIS TIME.
Position the washing machine next to the wall. Hook the outlet
tube to the edge of the bath tub, paying attention that there
are no bends or contractions along the tube.
It is better to connect the discharge hose to a fixed outlet of
a diameter greater than that of the outlet tube and at a
height of min. 50 cm. If is necessary to use the plastic sleeve
supplied.
EN
min 50 cm
max 85 cm
+2,6 mt max
max 100 cm
min 4 cm
Use front feet to level the machine with the floor.
a) Turn the nut clockwise to release the screw adjuster of the
foot.
b) Rotate foot to raise or lower it until it stands firmly on the
ground.
c) Lock the foot in position by turning the nut anti-clockwise
until it comes up against the bottom of the machine.
Ensure that the Off/On button (C) is not pressed.
Ensure that all the knobs are on the “0” position and that the
door is closed.
Insert the plug.
After installation, the appliance must be positioned so that
the plug is accessible.
Press the START (C) button. The power on (N) light will light up.
If this does not light up see faults search.
EN
35
A
B
C

Содержание

Fix the sheet of corrugated material on the bottom as shown in picture Use front feet to level the machine with the floor a Turn the nut clockwise to release the screw adjuster of the foot Connect the fill hose to the tap The appliance must be connected to the water mains using new hose sets The old hose sets should not be reused IMPORTANT DO NOT TURN THE TAP ON AT THIS TIME b Rotate foot to raise or lower it until it stands firmly on the ground c Lock the foot in position by turning the nut anti clockwise until it comes up against the bottom of the machine Ensure that the Off On button C is not pressed Position the washing machine next to the wall Hook the outlet tube to the edge of the bath tub paying attention that there are no bends or contractions along the tube Ensure that all the knobs are on the 0 position and that the door is closed It is better to connect the discharge hose to a fixed outlet of a diameter greater than that of the outlet tube and at a height of min 50 cm If is necessary to use the plastic sleeve supplied Insert the plug After installation the appliance must be positioned so that the plug is accessible Press the START C button The power on N light will light up If this does not light up see faults search 34 35

Скачать
Случайные обсуждения