Texas El-Tex 1000 Инструкция по эксплуатации онлайн [15/26] 13288

When you want the machine to work in deep soil, the most effective way is to let the ma-

chine move forward one arms length. Then pull the machine back towards you. Then

move forward again.

The blades must always run at the highest speed. Make sure they are not overloaded.

If the blades are stuck in the soil, then sway the machine from side to side in that way the

blade will get released from the soil.

Use one of these work patterns when preparing an area for sowing.

6. Blades

If the blades are worn or broken they can be replaced. See fig. 6. Lack of maintenance will

lead to poor cultivating results or overload of the engine. Always use gloves when working

near the blades.

The blades may only be replaced as a set. Remove the outer lock pin and the outer

blades, then the inner lock pin and the inner blades. (fig. 6).

www.texas.dk