InFocus IN5554L Руководство по замене лампы онлайн [2/2] 132836

Turn the projector off and unplug the power cord.

2 Wait 60 minutes to allow the projector to cool thoroughly.

3 Remove the lamp doors by loosening 2 captive screws on each lamp door and

pulling the doors straight off being careful not to damage the ground wires

connecting the doors to the projector. Note: Do not remove the ground wires.

4 Loosen the 3 captive shoulder screws (marked by arrows) that attach the first

lamp module to the projector. Carefully remove the lamp module. Do the same

for the second lamp module. Dispose of the lamps in an environmentally

proper manner in accordance with local disposal laws.

5 Carefully align and insert the new lamp modules and tighten the screws.

6 Replace the lamp doors and secure the screws.

7 Plug in the power cord, turn on the power switch and press the Power button

to turn the projector back on. Note: Connection to a circuit with a minimum of

20A capacity is recommended.

8 To reset the lamp hour timer, use the RS232 commands, LMR (Lamp 1) and LDR

(Lamp 2). See the User’s Manual Appendix for more information.

Tu r n o f f a n d

unplug projector

Wait 60

minutes

(1) (2)







(3)

(4)

(5)

(6)

Lamp 2

Lamp 1