Polaris PDF 30 Инструкция по эксплуатации онлайн [10/13] 13815

Polaris PDF 30 Инструкция по эксплуатации онлайн [10/13] 13815
Install the back grill (2) firmly to the motor front panel (1).
Fasten the nut to fix the grill.
Blades assembling
Unfasten clockwise the decorative nut from the motor axle (only for PDF 30).
Install blades on the motor axle.
Fasten anti-clockwise the decorative nut (only for PDF 30).
Use safety screws and rotating clips to install the front grill of the fan.
V. Operation of the appliance
Use speed buttons on the control panel to set a desirable speed of the fan.
Use «0» button to switch off.
Use «1» button to choose low speed.
Use «2» button to choose medium speed.
Use «3» button to choose fast speed (only for PDF 30).
Oscillating mode
To make the fan move from side to side push the Oscillating pin (1)
down.
To stop - pull the pin up.
Choosing a slope
Unfasten the angle regulator.
Choose a desirable slope angle.
Fasten the angle regulator
VI. Cleaning and storage
Switch off and unplug from the power supply before cleaning.
We recommend the periodic cleaning of this fan by lightly running a vacuum cleaner nozzle over the fan
grill to remove any dust or dirt that may have accumulated inside or on the unit.
Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan housing. Before
switching on remove the rest of the water using a soft and dry cloth.
Do not allow water to drip on or into the fan motor housing.
Don’t use sprays.
Attention: To protect against fire or electric shock, do not allow any water to drip on or into the fan. The
motor of the fan was lubricated during the assembling process in the plant. An additional lubrication while
using the appliance is not needed. There is also no need in any technical maintenance from the user. The
repair must be done just by qualified specialists of the service center.
The unit should be kept in a clean and dry place.
1
Скачать