AM.PM sense f7500000, для кухни Инструкция по эксплуатации онлайн [4/21] 145218

AM.PM sense f7500000, для кухни Инструкция по эксплуатации онлайн [4/21] 145218
6 7
1. Disconnect hot and cold water supply
system. Screw in eccentric adapters to the
outlets of the water supply pipelines having
rst sealed the threaded part with insulating
material. Adjust the location of the eccentric
adaptors so that they match together and
correspond to the mixer connecting position,
herewith mixer position should be horizontal
(distance between eccentric centers –
150mm).
2. Remove (screw loose) aerator of bath/
shower mixer (to avoid aerator clogging
during rst water startup).
3. Install wall plates onto the eccentric
adaptors using a tool with soft coating (to
avoid damage of mixer nuts decorative
cover), connect mixer housing.
4. Switch on water supply system. Once
mixer is in the closed position check all
connections for leakproofness. When
necessary arrange additional tightening and
sealing of connections.
5. Connect shower hose and hand shower.
6. Open cold and hot water supply through
mixer outow for short period of time,
afterwards close water supply and install
(screw tight) aerator.
mIxEr INStallatIoN coNcEalEd mIxEr
F7575000 F7585000
Operating interval of pressure in water
supply network 0,5–6,0 Atm. (50–620 kPa).
Recommended pressure interval in water
supply network 2,0–5,0 Atm (206–515 kPa).
Difference of cold and hot water pressure
should not exceed ± 10 %. In case
of deviation of water supply system
pressure parameters to the specied
values installation of devices for pressure
increase / reduction is required.
To avoid mechanical (abrasive) particles
penetration inside the product it is
recommended to install lters
of 100–300 mk.
Скачать
Случайные обсуждения