Zyxel VMG5313-B10A Инструкция по эксплуатации онлайн [52/398] 154554

Chapter 4 Tutorials

VMG5313-B10A/-B30A Series User’s Guide

To configure a static route to route traffic from N1 to N2:

1 Log into the VMG’s Web Configurator in advanced mode.

2 Click Network Setting > Routing.

3 Click Add new static route in the Static Route screen.

4 Configure the Static Route Setup screen using the following settings:

4a Select the Active check box. Enter the Route Name as R.

4b Set IP Type to IPv4.

4c Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.

4d Select Enable in the Use Gateway IP Address field. Type 192.168.1.253 (R’s N1 address)

in the Gateway IP Address field.

4e Select VDSL/ppp1.1 as the Use Interface.

4a Click OK.

Now B should be able to receive traffic from A. You may need to additionally configure B’s firewall

settings to allow specific traffic to pass through.

R’s N1 192.168.1.253

R’s N2 192.168.10.2

B 192.168.10.33

Table 4 IP Settings in this Tutorial

DEVICE / COMPUTER IP ADDRESS