Polaris PCSH 0420 RCD Инструкция по эксплуатации онлайн [11/14] 17065

5. Turn on the appliance by pressing the button (7) “POWER” ( )

6. When you will press the “POWER” button for the first time, the appliance will show the outer

temperature in Fahrenheit. In order to show get the temperature in Celsius, you should press “+”

and “-” buttons simultaneously.

7. When you will turn the appliance on, it will operate in high power mode (1500Wt).

8. In order to switch it to the low power mode , you should press button (8).

9. In order to turn the appliance off, you should press the “POWER” button (7) one more time.

10. Oscillation function. When you press the “OSC” (6) button, the body of the appliance starts

to revolve on the vertical axis. This let you to warm the room in better way. In order to turn the

function off, you should press the “OSC” (6) function one more time.

11. Timer function. This function let you set the time of heater work from 1 till 8 hours. Each

pressing on the button adds 1 hour to the working time. If there is already set 8 hours for timer

and you press the button one more time, the timer turns off and the appliance will work

continuously.

12. Set temperature maintenance. Set the required temperature pressing buttons “+” or “-”. When

you press the “+” or “-” buttons, the set temperature and

symbol will be lighted on the display. If

the outer temperature is higher, then the set temperature, the heater will be turned off. And on the

contrary, if the outer temperature is lower, then the set one, the set one, the heater will be turned

on. This function will be turned off, if you press the button

and if you will switch the power

mode into the low mode .

13. Remote control. The control over all the functions is available from the control panel and from

the remote control also.

- Before you start using of the RC, please, insert 2 batteries of “AAA” type.

- Do not use old and new

batteries at the same time

as well as batteries of

different types.

14. Protection function. The

heater has two levels of

protection.

- The protection from the overheating. In order to turn on the heater after the snapping this protection into

action, you should plug the heater out from the power line, let it get cool for 10 minutes. Then turn it on

according to manual instruction.

- The protection against the overturning.

VI. Cleaning and maintaining.

 Before cleaning unplug the appliance and let it get cool. Wipe it with soft wet cloth. Don’t use solvents

or abrasives.

 You should regularly clean, wipe the dust from the appliance for the dust negatively effects on the

operation of the wall heater.

 Don’t scrape the body with hard instrument.

Front view

Back view