Polaris PCDH 1220X2 Инструкция по эксплуатации онлайн [11/14] 17476

IV. The heater operation

 Plug the device in the outlet.

 Put the power regulator to position “ON” to switch on the heater.

 There are 4 programs of heating:

О - OFF

(“ ”● ) - fan only, "cool air" function

●● - 1000 watt

●●● - 2000 watt

 Switch the power regulator and thermostat to maximum power to heat the room quickly. When

the current temperature is high enough, choose another program of heating to reduce the electric

power consumption and to prevent the overheating of the room.

 From this moment the thermostat will continue to work automatically keeping the constant

temperature.

 Choose intensive program of heating if it is a cold weather.

 Choose “ ” program and set the ● thermostat regulator to maximum power to switch on the “cool

air” function.

V. Cleaning and storage

 Before cleaning, be sure the heater is unplugged, and it has cooled completely. Wipe the exterior

of the heater with a damp cloth or sponge. Do not use abrasive soaps, cleansers, or scouring pads

on any part of the heater.

 It is necessary to clean the ceramic heater, to wipe a dust from its surface as it influences

negatively the work of the device.

 In case of damage of the appliance please contact our authorized service agents.

 The storage of the appliance should be arranged in original gift box.

Note: Some differences between the user’s manual and the article are possible to exist, according to

the permanent process of technological modernization. The manufacture hopes that the customer will

pay attention to it.

VI. Specification

Power supply: 220-230 V

Frequency: 50 Hz

Power: 2000 W

VII. Guarantee information