SOLER&PALAU td-250/100 silent t Инструкция по эксплуатации онлайн [7/52] 163207
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

SOLER&PALAU td-250/100 silent t Инструкция по эксплуатации онлайн [7/52] 163207

SOLER&PALAU td-350/125 silent Инструкция по эксплуатации онлайн [7/52] 163206
adequate thermal and overloading
protection has been connected and
adjusted to the corresponding limits.
- If a ventilator is installed in a duct, the duct
must be exclusively for the ventilation
system.
Starting up.
Before starting up the machine, make sure
that:
- The apparatus is well secured and the
electrical connections have been carried
out correctly.
- The safety devices have been adequately
connected.
- No loose material or fitting remains can be
sucked up by the ventilator. If the ventilator
has been mounted in a duct, make sure it
is clear of loose material.
- The earth fittings are adequately
connected.
- The electrical safety devices are correctly
connected, adequately adjusted and ready
for use.
- The wire and electrical connections inputs
are correctly sealed and water-tight.
When starting up the machine, make sure
that:
- The propeller turns in the correct direction.
- There are no abnormal vibrations.
- If any of the electrical safety devices blow,
the apparatus must be quickly
disconnected from the mains supply. The
whole installation should be carefully
checked before trying to start up the
machine again.
Maintenance.
- Before manipulating the ventilator, make
sure it is disconnected from the mains
supply even if it has previously been
switched off. Prevent the possibility of
anyone else connecting it while it is being
manipulated.
- The apparatus must be regularly
inspected. These inspections should be
carried out bearing in mind the machine’s
working conditions, in order to avoid dirt or
dust accumulating on the propeller, turbine,
motor or grids. This could be dangerous
and perceptibly shorten the working life of
the ventilator unit.
- While cleaning, great care should be taken
not to unstable the propeller or turbine.
- All maintenance and repair work should be
carried out in strict compliance with each
country’s current safety regulations.
Recycling.
- EEC Standards, together with the
responsibility we should assume with
future generations in mind, oblige us to
recycle all the materials we can. Therefore,
please deposit all left-over material and
packaging in their corresponding recycling
containers and hand in the replaced
machines to the nearest handler of this
type of waste product.
If you have any queries about S&P products,
please contact our after-sales service in
Spain, or your local S&P dealer in any other
country. If in doubt, please visit our Web-
Page at www.solerpalau.com

Содержание

Похожие устройства

adequate thermal and overloading protection has been connected and adjusted to the corresponding limits If a ventilator is installed in a duct the duct must be exclusively for the ventilation system Starting up Before starting up the machine make sure that The apparatus is well secured and the electrical connections have been carried out correctly The safety devices have been adequately connected No loose material or fitting remains can be sucked up by the ventilator If the ventilator has been mounted in a duct make sure it is clear of loose material The earth fittings are adequately connected The electrical safety devices are correctly connected adequately adjusted and ready for use The wire and electrical connections inputs are correctly sealed and water tight When starting up the machine make sure that The propeller turns in the correct direction There are no abnormal vibrations If any of the electrical safety devices blow the apparatus must be quickly disconnected from the mains supply The whole installation should be carefully checked before trying to start up the machine again Maintenance Before manipulating the ventilator make sure it is disconnected from the mains supply even if it has previously been switched off Prevent the possibility of anyone else connecting it while it is being manipulated The apparatus must be regularly inspected These inspections should be carried out bearing in mind the machine s working conditions in order to avoid dirt or dust accumulating on the propeller turbine motor or grids This could be dangerous and perceptibly shorten the working life of the ventilator unit While cleaning great care should be taken not to unstable the propeller or turbine All maintenance and repair work should be carried out in strict compliance with each country s current safety regulations Recycling EEC Standards together with the responsibility we should assume with future generations in mind oblige us to recycle all the materials we can Therefore please deposit all left over material and packaging in their corresponding recycling containers and hand in the replaced machines to the nearest handler of this type of waste product If you have any queries about S P products please contact our after sales service in Spain or your local S P dealer in any other country If in doubt please visit our WebPage at www solerpalau com

Скачать