Scarlett sc-si30k01 Инструкция по эксплуатации онлайн [5/30] 164192

IM012

www.scarlett.ru SC-SI30К01

 The water tank should be emptied after each use.

SPRAYING

 As long as there is enough water in the water tank, you may use the spray button at any temperature setting

during steam or dry ironing.

 Press the spray button several times to activate the pump while you are ironing.

 When finished, turn the temperature dial counterclockwise to the minimum position and unplug the appliance

from the power supply.

CAUTION: Avoid coming in contact with ejected steam.

DRY IRONING

 The steam iron can be used on the dry setting with or without water in the water tank, however it is best to avoid

having the water tank full while dry ironing.

 Turn the variable steam control to the minimum position 0.

CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not refill it with water

until the steam iron cools down.

BURST OF STEAM

NOTE: For the best steam quality, do not use more than three successive bursts each time, because the iron will

cool.

VERTICAL STEAM

 Ensure that there is enough water in the water tank.

 Stand the steam iron on its heel rest on an iron-safe surface and plug it.

 Set the temperature control dial and variable steam control to their maximum positions.

 Hold the iron vertically and press the steam burst button, an intense steam will be ejected from the soleplate.

ANTI-DRIP FUNCTION

 The ‘Anti-drop’ function prevents water spills and helps avoid the blotches on the fabric which may appear when

the iron works at low temperatures.

 Fill the water tank with water according to instructions.

 Set the thermostat to ECO position.

 Set the steaming power knob to position 2.

WHEN YOU FINISHED IRONING

 Set the temperature dial to the minimum position.

 Remove the mains plug from the wall socket.

AUTOMATIC TURN-OFF

 This function turns the iron off automatically if the iron remains in horizontal position for more than 30 seconds or

if the iron stands vertically for more than 10-15 minutes. This function completely eliminates the risk of fire.

CARE AND CLEANING

 Allow the iron to heat up until the indicator light goes out.

 Holding the iron horizontally over the sink then change the steam control to the maximum position II and press

the self-cleaning button.

 Boiling water and steam will be ejected from the holes in soleplate with Impurities washed out. Rock the iron

forwards and backwards during this operation.

 Repeat self-cleaning if you notice that much impurity has been washed out.

 Move the iron over an old (preferably) piece of cloth. This to ensure that the soleplate will be dry during storage.