Pioneer CDJ-400 Инструкция по эксплуатации онлайн [19/162] 18521
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Pioneer CDJ-400 Инструкция по эксплуатации онлайн [19/162] 18521

Pioneer CDJ-400 Инструкция по эксплуатации онлайн [19/162] 18521
OPERATIONS (ADVANCED OPERATIONS)
19
<DRB1451>
En
English
VINYL
CUE
REV
AUTO CUE
PLAY/PAUSE
DIRECTION
REV
CUE
MEMORY/
DELETE
CUE/LOOP
CALL
Cue point/loop point memory
The CDJ-400 is able to save cue points and loop points in memory.
One cue/loop point can be saved in memory for each track.
A single loop is composed of two points (IN/OUT).
7 Recording a cue point
1. Use the auto cue function or CUE button to input a cue
point.
2. Press the CUE/LOOP MEMORY button.
The [MEMORY] indicator will light, showing that the cue point
has been stored.
7 Recording a loop point
1. Set a loop-in point and loop-out point and begin loop play-
back.
2. During loop playback, press the CUE/LOOP MEMORY but-
ton.
The [MEMORY] indicator will light, showing that the loop data
has been stored.
7 To recall a memorized cue/loop point
If a cue/loop point is saved, the [MEMORY] indicator will light.
1. Press the CUE/LOOP CALL button.
When the CALL button is pressed, the cue/loop point will be
called up from memory, and the player will enter the standby
mode at that point.
2. Press the PLAY/PAUSE button (6).
Play/loop play will begin.
7 To delete cue/loop points
1. Press the CUE/LOOP CALL button.
When the CALL button is pressed, the cue/loop point will be
called up from memory, and the player will enter the standby
mode at that point.
2. Hold down the MEMORY/DELETE button for one second
or more at the cue/loop point you wish to delete.
The display will show the [DELETE] message, and the selected
cue point or loop point data will be erased.
Relay play using two players
By using the supplied control cable to connect the CONTROL connec-
tors of two CDJ-400, or other CDJ series CD players, relay play can be
performed. ☞P.8
Set both players’ auto cue function to ON (The [A.CUE] indicators
will light in the displays.)
Set the DJ mixers Cross Fader control to its center position.
1. Begin playback on the first player.
2. When the currently playing track ends, playback will begin
automatically on the standby player.
3. The first player will enter cue pause mode at the beginning
of the next track on its disc.
By repeating this operation, the two players can be used to per-
form continuous relay play.
By loading new discs and choosing desired tracks on the player
in standby, a continuous program of selected tracks can be
played.
By setting a cue point on the standby player, a relay of any
desired cue point of the selected track can be performed.
☞P.17 “Cue Point Settings”
Note:
Relay play may not operate properly if the AUDIO
OUT jacks on the two players are not connected to
the same DJ mixer.
If the power to one player is turned off during its
playback, the other player may begin playback.
Fader start and relay play cannot be performed si-
multaneously, since different control cord connec-
tions are required.
Writing and reading data
Using a USB memory device, data (cue/loop points) saved from the
CDJ-400 can be copied to other players.
7 Writing data to USB memory devices
1. With no USB memory device or discs inserted into the
player, hold the OUT/OUT ADJUST button depressed for
five seconds or more.
The OUT/OUT ADJUST button will light, and [WRITE MODE] will
appear in the display.
2. Connect a USB memory device, and press PLAY/PAUSE
once the USB MEMORY indicator lights.
The playing address section will begin to light, and data will begin
writing to the USB memory device. Once the writing of data fin-
ishes, [END] will appear in the display, and the unit will return to
the regular operating mode.
If [ERROR] appears in the display, the data writing has not been
completed properly. Turn the unit’s power off then on again,
and restart the process from step 1.
Any data in the USB device will be overwritten, so all previ-
ously saved data on the device will be lost.
7 Reading data from a USB memory device
1. With no USB memory device connected or disc inserted,
hold the IN/REALTIME CUE/HOT LOOP button depressed
for five seconds or more.
The IN/REALTIME CUE/HOT LOOP button will light, and [READ
MODE] will appear in the display.
2. Connect the USB memory device, and press PLAY/PAUSE
once the USB MEMORY indicator lights.
The playing address section will begin to light, and data read-in
will begin. Once all data has been read, [END] will appear in the
display, and the unit will return to normal operation mode.
If [ERROR] appears in the display, the reading of data has not
been properly completed. Turn the unit’s power off then on
again, and restart the process from step 1.
* Any data within the CDJ-400 will be overwritten, so all previously
saved data will be lost.
Seamless reverse playback cannot be performed with loops of 15
seconds or more.
If track search or loop play are performed, scratch/reverse opera-
tions may be temporarily disabled.
In the case of MP3, reverse play that overlaps multiple folders is
not possible.
During MP3 play, reverse playback may not occur immediately
with some tracks. (The message [Searching] may appear on the
display while play time information is read into the unit before
playback starts.)

Похожие устройства

OPERATIONS ADVANCED OPERATIONS Relay play using two players By using the supplied control cable to connect the CONTROL connec tors of two CDJ 400 or other CDJ series CD players relay play can be performed P 8 Set both players auto cue function to ON The A CUE indicators will light in the displays Set the DJ mixers Cross Fader control to its center position 1 Begin playback on the first player 2 When the currently playing track ends playback will begin automatically on the standby player 3 The first player will enter cue pause mode at the beginning of the next track on its disc By repeating this operation the two playerscan be usedtoperform continuous relay play By loading new discs and choosing desired tracks on the player in standby a continuous program of selected tracks can be played By setting a cue point on the standby player a relay of any desired cue point of the selected track can be performed P 17 Cue Point Settings Note Relay play may not operate properly if the AUDIO OUT jacks on the two players are not connected to the same DJ mixer If the power to one player is turned off during its playback the other player may begin playback Fader start and relay play cannot be performed si multaneously since different control cord connec tions are required Cue point loop point memory The CDJ 400 is able to save cue points and loop points in memory One cue loop point can be saved in memory for each track A single loop is composed of two points IN OUT Recording a cue point 1 Use the auto cue function or CUE button to input a cue point 2 Press the CUE LOOP MEMORY button The MEMORY indicator will light showing that the cue point has been stored Recording a loop point 1 Set a loop in point and loop out point and begin loop play back 2 During loop playback press the CUE LOOP MEMORY but ton The MEMORY indicator will light showing that the loop data has been stored To recall a memorized cue loop point If a cue loop point is saved the MEMORY indicator will light 1 Press the CUE LOOP CALL button When the CALL button is pressed the cue loop point will be called up from memory and the player will enter the standby mode at that point 2 Press the PLAY PAUSE button II Play loop play will begin To delete cue loop points 1 Press the CUE LOOP CALL button When the CALL button is pressed the cue loop point will be called up from memory and the player will enter the standby mode at that point 2 Hold down the MEMORY DELETE button for one second or more at the cue loop point you wish to delete The display will show the DELETE message and the selected cue point or loop point data will be erased Writing and reading data Using a USB memory device data cue loop points saved from the CDJ 400 can be copied to other players Writing data to USB memory devices 1 With no USB memory device or discs inserted into the player hold the OUT OUT ADJUST button depressed for five seconds or more The OUT OUT ADJUST button will light and WRITE MODE will appear in the display 2 Connect a USB memory device and press PLAY PAUSE once the USB MEMORY indicator lights The playing address section will begin to light and data will begin writing to the USB memory device Once the writing of data fin ishes END will appear in the display and the unit will return to the regular operating mode If ERROR appears in the display the data writing has not been completed properly Turn the unit s power off then on again and restart the process from step 1 Any data in the USB device will be overwritten so all previ ously saved data on the device will be lost Reading data from a USB memory device 1 With no USB memory device connected or disc inserted hold the IN REALTIME CUE HOT LOOP button depressed for five seconds or more The IN REALTIME CUE HOT LOOP MODE will appear in the display button will light and READ 2 Connect the USB memory device and press PLAY PAUSE once the USB MEMORY indicator lights The playing address section will begin to light and data read in will begin Once all data has been read END will appear in the display and the unit will return to normal operation mode If ERROR appears in the display the reading of data has not been properly completed Turn the unit s power off then on again and restart the process from step 1 Any data within the CDJ 400 will be overwritten so all previously saved data will be lost 19 DRB1451 En English Seamless reverse playback cannot be performed with loops of 15 seconds or more If track search or loop play are performed scratch reverse opera tions may be temporarily disabled In the case of MP3 reverse play that overlaps multiple folders is not possible During MP3 play reverse playback may not occur immediately with some tracks The message Searching may appear on the display while play time information is read into the unit before playback starts

Скачать