Moxa VPort P16-1MP-M12-CAM36-CT-T Руководство по аппаратной части онлайн [6/15] 171807

- 6 -

NOTE

The power input rating of the VPort P16-1MP-M12 is 48V/0.35A,

and the maximum power consumption is about 5 W.

NOTE

The equipment is designed for installation inside a building, and is

not intended to be exposed to the outdoors.

• Reset button: Loosen the screw and use a pointed stick, such as a

toothpick, to push in the reset button to reboot to factory defaults.

 Reboot: press the button once and then release.

 Factory default: press and hold the button for at least 5 seconds.

Top View without top cover and dome cover

• Calibration for tuning the horizontal lens position (0 to 350°):

After tuning the horizontal lens position, mark the position with this

calibration for future replacement or mass installations.

• 2 screws for fixing the horizontal lens position: There are 2

screws for fixing the horizontal lens position. A 5.5 kgf-cm torque is

required for onboard environments.

Side view without top cover and dome cover

• 2 screws for fixing the vertical lens position: There are 2 screws

for fixing the vertical lens position. The vertical lens position can be

tuned from 0° to 80°. A 5.5 kgf-cm torque is required for onboard

environments.