Gorenje KT05NS Инструкция по эксплуатации онлайн [13/32] 19564

Using your appliance

• Do not place the appliance on or near heat sources.

• Do not use the appliance outdoors.

• Always protect the appliance from water or excessive humidity.

• Do not use the appliance at ambient temperatures below 10 °C or above 30 °C.

• Do not use the bowl in a microwave oven.

After use

• Remove the batteries when the appliance is not going to be used for a longer period of time.

• When not in use, the appliance should be stored in a dry place. Children should not have access to stored

appliances.

Inspection and repairs

• Before use, check the appliance for damaged or defective parts. Check for breakage of parts and any other

conditions that may affect its operation.

• Do not use the appliance if any part is damaged or defective.

• Have any damaged or defective parts repaired or replaced by an authorised repair agent.

• Never attempt to remove or replace any parts other than those specified in this manual.

ELECTRICAL SAFETY

• To avoid the risk of short circuiting, do not immerse the appliance or the batteries in water or other liquid.

• Use only the correct type of battery for the appliance (see technical data).

• Never attempt to charge non-rechargeable batteries.

• The electronic components inside the appliance may be affected by other devices used in close proximity,

such as mobile phones or microwave ovens. If this happens, the display will show erroneous data.

• To remedy this, either switch the interfering device off, or move the appliance away from it.

USE

Switching on and off

• Press the on/off/tare button to switch the appliance on.

• In addition, the appliance is fitted with an auto shut-off function, which automatically switches off the

appliance after approximately two minutes.

Setting the tare weight

• Press the on/off/tare button (1) to set the reading on the display (3) to zero.

• When using the bowl (4), first put the empty bowl on the scales and press the on/off/tare button to set the

reading on the display to zero.

Setting the weighing unit

• The weighing unit can be set to (g), (oz), (lb), (kg).

• Press the unit button (2) until the arrow in the display points to the desired unit.

• The weighing unit can be changed at any time while weighing.

Weighing

• Place the scales on a flat surface.

• Place the object to be weighed on the scales and read off the weight in the display (3).